200-2000 Production Spray Dryer, Maximum Speed 8000-15000 RPM, BiLon (CAT#: STEM-GMAE-3047-LGZ)

Spray drying is the most widely used process in the liquid process forming and drying industry. Ideal for producing powdered, granular or bulk solid products from solutions, emulsions, suspensions and plastic pasty liquid raw materials. Therefore, when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet precise criteria. Spray drying is an ideal process. The drying speed is fast, and the surface area of ​​the material liquid is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated instantly, and the drying time is only a few seconds, especially for the drying of heat-sensitive materials. LPG series high-speed centrifugal spray dryer products have good uniformity, fluidity and solubility, high product purity and good quality. The production process is simplified and the operation control is convenient. For liquids with a moisture content of 40-60% (special materials can reach 90%), it can be dried into powder products at one time. After drying, there is no need to pulverize and screen, reducing production processes and improving product purity. The particle size, bulk density and water content of the product can be adjusted by changing the operating conditions within a certain range, and the control and management are very convenient.

Inlet temperature (°C): 140-350 automatic control
Outlet temperature (°C): 80-90
Water evaporation: 200-2000
Transmission form of centrifugal spray head: mechanical transmission
Maximum speed (r.p.m): 8000-15000
Spray disc diameter (mm): 180-240
Heat source: steam + electricity, fuel oil, gas, hot stove air
Dimensions (m): Determined according to the actual situation
Dry powder recovery (%): ≥95

1. Chemical industry: sodium fluoride (potassium), basic dyes and pigments, dye intermediates, compound fertilizers, formaldehyde silicic acid, catalysts, sulfuric acid agents, amino acids, white carbon black, etc.
2. Plastic resin: AB, ABS emulsion, urea-formaldehyde resin, phenolic resin, sealant (urea) formaldehyde resin, polyethylene, polyvinyl chloride, etc.
3. Food industry: fat-rich milk powder, gluten, cocoa milk powder, milk replacer, blood hunting powder, egg (yellow), etc.
Food and plants: oats, chicken juice, coffee, instant tea, seasoning meat, protein, soybean, peanut protein, hydrolyzate, etc.
4. Sugars: corn steep liquor, corn starch, glucose, pectin, maltose, potassium sorbate, etc.
Ceramics: alumina, tile materials, magnesia, talc, etc.

ZPG-50 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 50 kg/h, BiLon(CAT#-STEM-GMAE-3038-LGZ)
ZPG-80 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 80 kg/h, BiLon(CAT#-STEM-GMAE-3039-LGZ)
ZPG-100 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 100 kg/h, BiLon(CAT#-STEM-GMAE-3040-LGZ)
ZPG-150 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 150 kg/h, BiLon(CAT#-STEM-GMAE-3041-LGZ)
ZPG-200 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 200 kg/h, BiLon(CAT#-STEM-GMAE-3042-LGZ)
ZPG-300 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 300 kg/h, BiLon(CAT#-STEM-GMAE-3043-LGZ)