Acquity I-Class UPLC Sample Manager-FTN, Waters (CAT#: STEM-CPO-0370-ZJF)

The manufacturer of the Acquity I-Class UPLC Sample Manager-FTN, Waters is Waters.
Refurbished Waters Acquity I-Class UPLC sample manager-FTN pictured with complete I-class UHPLC stack.

Condition: Refurbished, Certified Pre-owned
Injection volume range:
0.1 to 10.0 μL as standard configuration
Up to 1000.0 μL with optional extension loop
Accuracy: ±0.2 μL, measured by fluid weight removed from vial with 10.0 μL injections averaged over 20 injections using standard 100-μL syringe
Injection linearity: >0.999 (See ACQUITY UPLC I-Class System Specifications document for conditions)
Sample manager precision:
<1% area RSD 0.2 to 1.9 µL injection
<0.5% area RSD 2 to 10 µL injection
Maximum sample capacity:
Any two of the following:
96 and 384 microtiter plates
48 position 2.00-mL vial plates
48 position 0.65-mL micro-centrifuge tube plates
24 position 1.50-mL micro-centrifuge tube plates
Sample compartment temperature range: 4.0 to 40.0 °C, settable in 0.1 °C increments; maintains 19 °C below ambient with a tolerance range between -2 and +4 °C
Temperature accuracy: ±0.5 °C at sensor
Temperature stability: ±1.0 °C at sensor
Injection needle wash: Integrated, active, programmable
Minimum sample required: 3 μL residual, using Waters’ total recovery 2-mL vials (zero offset)
Carryover (UV):
<0.004%
<0.001% typical
Advanced sample manager capabilities: Auto-dilution and auto-addition
Primary wetted materials: 316L stainless steel, polyimide, PEEK blend, DLC, PPS

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

Acquity H-Class UPLC Core System, Waters
Acquity I-Class UHPLC System, Waters
Acquity Leak Sensor, Waters