The manufacturer of the Agilent 1100 G1377A Micro-WPS Well Plate Sampler is Agilent Technologies. The Agilent 1100 G1377A Micro-WPS is a micro-well plate sampler for use with the Agilent 1100 Series HPLC system. It allows for automated liquid handling and sample injection into the HPLC system, and is designed for use with 96- or 384-well microplates. The Micro-WPS features a compact design and easy operation, making it ideal for use in high-throughput laboratory settings.
Specification
Condition: Pre-owned Glp features: Early maintenance feedback (EMF), electronic records of maintenance and errors Communications: Communications Controller-area network (CAN). RS232C, APG-remote standard, optional four external contact closures and BCD vial number output Safety features: Leak detection and safe leak handling, low voltages in maintenance areas, error detection and display Injection range: 8 µl in 0.01 µl increments with the small loop capillary 40 µl in 0.01 µl increments with the extended loop capillary Precision: Typically < 0.5 % RSD of peak areas from 5 – 40 µl, Typically < 1 % RSD from 1 – 5 µl Typically < 3 % RSD from 0.2 – 1 µl Sample viscosity range: 2 – 5 cp Sample capacity: 2× well-plates (MTP) + 10 × 2 ml vials 100 x 2 ml in one tray 40 x 2 ml in half tray Injection cycle time: Typically, < 30 s using following standard conditions: Default draw speed: 4 µl/min Default eject speed: 10 µl/min Injection volume: 0.1 µl Carry-over: Typically < 0.05 % using the following conditions: Column: 150 x 0.5 mm Hypersil ODS, 3 µm Mobile phase: Water/Acetonitrile = 85/15 Column Flow rate: 13 µl/min Injection volume: 1 µl caffeine (=25ng caffeine), 1 µl water to test carryover Outside wash of needle before injection: 20 sec with water using flush port
Features
Refurbished to meet manufacturer's specification In excellent condition Thoroughly cleaned Certified with warranty