Agilent 6890 GC Gas Chromatograph Series, Average Weight 49 kg, HP Agilent (CAT#: STEM-AIAEPO-0161-LGZ)

The Agilent 6890 Series GC (Gas Chromatography System), sometimes referred to as the HP 6890, is the high-performance successor to the HP Agilent 5890 line of gas chromatographs. It is considered one of the best gas chromatograph (GC) systems available today and is used for a variety of research laboratory applications including hydrocarbon processing, food safety, pesticide determination, chemical analysis, biodiesel, drug screening, toxicology, environment and law enforcement, producing exceptional results. The Agilent 6890N or "N" version is networkable, the Agilent 6890 is not.

This new model features electro-pneumatic control of all flows and gas pressures. The Agilent 6890 has a built-in sensor that automatically compensates for ambient temperature changes and air pressure differences. These sensors allow for more accurate and repeatable results. The EPC feature of the Agilent 6890 GC Series increases laboratory productivity and reduces recalibration frequency. Each EPC unit is optimized for its intended use.

The overall thermal performance of the Agilent 6890 GC provides optimal chromatography, including peak symmetry and retention index accuracy, while delivering fast results. The Agilent 6890 GC produces accurate temperature readings with excellent retention time repeatability, the foundation of all chromatographic measurements.

Condition: certified pre-owned
Height: 50 cm (19.7 in.)
Width: 58 cm (26.8 in.)
Depth: 54 cm (21.6 in.)
Average Weight: 49 kg (108 lb)
Networkable: No
Ambient Operating Temperature: 15 ˚C to 35 ˚C
Ambient Operating Humidity: 5-95 %
Storage Extremes: -40˚C to 65˚
Line Voltage Requirements: ±5% of nominal
Dimensions: 28 x 31 x 16 cm
Operating temperature: 4˚C above ambient to 450˚C
Maximum run time: 120˚C/min
Available Detectors for the Agilent 6890 GC: Flame ionization detector (FID); Thermal conductivity detector (TCD); Micro-electron capture detector (micro-ECD); Nitrogen-phosphorus detector (NPD); Single- or dual-wavelength flame photometric detectors (FPD); Atomic emission detector (AED); Mass selective detector (MSD)

The Agilent 6890 offers a complete selection of inlets: split/non-split, purge pack, on-column cooling, PTV and volatile interfaces.
Wide selection of the most sensitive detectors including flame ionization (FID), thermal conductivity (TCD), NPD, microecd, MSD and HP 5972, HP 5973 mass selective detectors.
Early Maintenance Feedback (EMF) alerts you when maintenance is due.
Several optional sample introduction techniques include headspace, purge, trap, and valve.
Equipped with Electro-Pneumatic Control (EPC) function.

GENESYS 5000 Series Multi-well Gamma Counters, GENESYS (CAT#-STEM-AIAEPO-0150-LGZ)
ISO Data Multiwell Gamma Counter Series, Multiple Tube compatibility, ISO (CAT#-STEM-AIAEPO-0151-LGZ)
Packard Cobra 5002 Gamma Counter Series, Detector Shield Thickness 51 mm, Packard Cobra (CAT#-STEM-AIAEPO-0152-LGZ)
Packard Cobra 5003 Gamma Counter Series, Detector Shield Thickness 76 mm, Packard Cobra (CAT#-STEM-AIAEPO-0153-LGZ)
Packard Cobra 5005 Gamma Counter Series, Detector Shield Thickness 18 mm, Packard Cobra (CAT#-STEM-AIAEPO-0154-LGZ)
Packard Cobra 5010 Gamma Counter Series, Detector Shield Thickness 18 mm, Packard Cobra (CAT#-STEM-AIAEPO-0155-LGZ)