Auto-Ex 32 Automatic Nucleic Acid Extractor, 50~1000 μl, Monad Biotech Co., Ltd. (CAT#: STEM-CTE-0040-YJL)

Auto-Ex 32 Automatic Nucleic Acid Extractor, 50~1000 μl, model Auto-Ex 32 is manufactured by Monad Biotech Co., Ltd. Auto-Ex 32 automatic nucleic acid extractor is a high-throughput, automatic, high-yield nucleic acid purification and extraction equipment developed based on the magnetic bead extraction method. It uses the adsorption and dissociation characteristics of nucleic acid and magnetic beads under specific conditions, and realizes the collection, release and transfer of magnetic beads through the movement of magnetic rods and magnetic sleeves, so as to achieve the purpose of separating nucleic acids. The whole process goes through lysis, adsorption, cleaning, elution, and recovery, and finally relatively high-purity nucleic acids are obtained.

Input power: AC100~240 V, 50/60 Hz
Input power: 300VA, MAX
Processing volume: 50~1000 μl
Sample throughput: 1~32
Applicable consumables: 96 round bottom deep well plates, 8 round bottom magnetic bar sets, single 6 round bottom tubes
Temperature setting range: 40~99℃
Magnetic bead recovery: >98%
Difference between extraction wells: CV<5%
Anti-pollution measures: UV disinfection lamps, gas exchange
Heater Blocks: Columns 2, 6, 8, 12 per deck
Mixing time: 0~59 min 59 s continuously adjustable
UV disinfection time: 0~120 min continuously adjustable
Drying time: 0~59 min 59 s continuously adjustable
Magnetization time: 0~59 min 59 s continuously adjustable
Mixing method: shaking and mixing
Waiting time for magnetic beads to settle: 0~59 min 59 s continuously adjustable
Magnetic speed: continuously adjustable
Adsorption amplitude up/down point: continuously adjustable
Mixing speed: continuously adjustable
Upper/lower point of mixing range: continuously adjustable
Volume: 36.0(W) × 32.0(D) × 39.3(H)
Weight: 18kg

Strong compatibility: It can handle a variety of samples, mix reagents of different volumes, and configure a temperature control module to meet the needs of various kits;
Supporting reagent consumables: provide the whole process solution of nucleic acid extraction, use Monad 96 round bottom deep well plate, 8-section round bottom magnetic bar set, and nucleic acid extraction kit with preset standard procedures, the nucleic acid extraction rate is higher and the quality is better ;
Pollution prevention and control: Built-in ultraviolet disinfection lamp, combined with gas exchange mode, can effectively prevent the generation of aerosol and the resulting cross-contamination;
Fast and efficient: easy to operate, greatly reducing the extraction time, and can extract 32 samples at the same time;
Small and lightweight: Small in size, it can be easily put into a biological safety cabinet for use.

Eva 3200 Ultra-trace Nucleic Acid Protein Detector, 0.5-2 μL (CAT#: STEM-PCRE-0007-YJL)