Automated Nucleic Acid Extraction and PCR Setup Workstation, 630mm×570mm×850mm, Autra9600, Liferiver Bio-Tech Corp. (CAT#: STEM-PE-0286-Y)

Autra9600 is a fully automated nucleic acid extraction and PCR setup workstation. By combining magnetic bead technology with an automated pipetting platform.

Function: Automated nucleic acid extraction and PCR setup
Throughput: 1~96 specimens
Processing Volume: 100-500μl
Running Time (full plate): 28 min/run
96-Deep-Well Plate: 4 pieces
Magnetic Cap (disposable): 1 strip
Extraction Method: Magnetic beads
Vortex Mix: Mode & speed adjustable
Contamination Prevention: Built-in UV lamp, independent outbound air path with HEPA filter able to absorb nucleic acid fragments
Magnetic Bead Recycle Rate: >95%
Pipetting Channel: 8
Pipetting Accuracy: 1μl(%CV:±5%), 10μl(%CV:±1%), 20μl(%CV:±0.8%),
Dimensions (L*W*H): 630mm×570mm×850mm
Weight: 45kg
Power: AC100V~240V(±10%); 50-60Hz
Power Consumption: 200VA
Environmental Condition: Temperature: 10-40°C Humidity: <85%

Pre-loaded plate with nucleic acid extraction reagent;
Extraction of 96 specimens in 10 minutes;
Transfer of purified nucleic acids into 96 wells in 5 minutes;
Reduced manual operations and improved efficiency;
Built-in UV lamp to disinfect the inside of the workstation;
HEPA filter to absorb aerosol;
Bio-safety and little risk of cross-contamination;
Minimal dimensions so as to save space;