Beckman J6-MI High Capacity Centrifuge Series, 252 kg, Beckman Coulter (CAT#: STEM-LCPO-0065-LGZ)

The Beckman J6-MI is a versatile high-capacity centrifuge capable of delivering a high level of separation technology. The J6-MI centrifuge solution is uniquely designed to achieve critical separations in volumes up to 6 liters.
Enjoy maintenance-free operation thanks to the rugged, brushless induction drive providing high torque, fast acceleration, and extended motor life due to low wear. Experience full control with up to ten operator-definable ramp profiles. Dedicated Aries rotors eliminate rotor imbalance; designed to automatically correct opposing, unbalanced loads up to 100 grams without manual intervention or delay.

Condition: certified pre-owned
Height: 91.0 cm (35.5 in); with door open 160 cm (63 in)
Width: 71.1 cm (28 in)
Depth: 83.8 cm (33 in)
Weight: 252 kg (555 lb)
Approximate Acceleration Time: Select from 9 acceleration rates (including maximum acceleration)
Approximate Deceleration Time: Select from 9 deceleration rates (including maximum dynamic braking, or a coasting stop from full speed)
g Force :6,835 x g
Max Capacity Volume Range: 6,000 mL
Max Speed: 6,000 rpm
Maximum Heat Dissipation into Room under Steady-State: 1.9 kW (7,000 Btu/hr)
Noise Level 1 Meter in Front of Centrifuge: < 63 dBA
Set Speed Actual rotor speed: ±20 rpm of set speed
Set Temperature: -20° C to +40° C
Set Time: Up to 99 hr 59.9 min for timed runs; entries greater than 99 hr 59.9 min signal “hold” or continuous operation
Speed Range: 100 to 6,000 rpm
Temperature Control: ±2° for temperature from 0° to ambient, after equilibration.1 Temperature Control at higher or lower temperatures depends on the rotor and speed used (some rotors have a narrower range of Temperature Control)
Ambient Temperature Range: 16° C to 38° C
Clearances Required: 15.0 cm (6.0 in)
Humidity Restrictions: < 95% (noncondensing)
Pollution Degree: 2
Rotor Chamber Diameter: 58.0 cm (23 in)
Time — Actual Display: Indicates time remaining for timed runs, time elapsed for continuous operation
Finish: Urethane paint on chamber door, vinyl paint on other painted surfaces, Mylar 2 on control panel
Operating Modes: Key switch selects NORMAL, PROGRAM LOCK, or ZONAL operation

Beckman Coulter XE-90K Ultracentrifuge, 485 kg, Beckman Coulter (CAT#-STEM-LCPO-0100-LGZ)
Beckman L-80XP Ultracentrifuge, 1,000 to 80,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0101-LGZ)
Beckman L8-70M Ultracentrifuge, 1000-7000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0102-LGZ)
Beckman L8-80M Ultracentrifuge, 0-45°C, Beckman Coulter (CAT#-STEM-LCPO-0103-LGZ)
Beckman Optima L-70 Ultracentrifuge, 70,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0104-LGZ)
Beckman Optima L-90K Ultracentrifuge, 90000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0105-LGZ)