Condition: Certified Pre-Owned
Electrical: 100-240V, 47-63Hz, 0.8 Amps
Includes Luminex XYP: (Electrical: 100-240V, 47-63Hz, 1.8 Amps)
Environment conditions
Operating temperature: 15-30°C (59-86°F)
Operating humidity, noncondensing: 20-80%
Operating altitude: Designed to operate at up to 2,000 m (6,600') mean sea level
Compensatory range: ±2°C
UL installation category: UL Installation Category II, as defined in Annex J of UL 3101-1
Pollution degree: UL Pollution Degree 2, as defined in Section 3.7, 3.2, of UL 3101-1
Bio-Plex Array Reader Specifications
Input voltage range: 100-240 V, 1.5 A, 47 - 63 Hz
Physical dimensions (W x D x H), cm: 43 x 51 x 23
Weight, kg/lb: 23/60
Lasers
Reporter laser: 532 nm, >10 mW, frequency-doubled diode; 30 x 60 µm elliptical beam
Classification laser: 635 nm, 10 mW, diode; 30 x 60 µm elliptical beam
Fluidics
Sheath flow rate, µl/sec: 90
Cuvette: 200 µm square flow channel
Sample injection rates, µl/sec: 60
Electronics
Reporter channel detection: Photomultiplier tube, A/D resolution 14 bits
Classification and doublet discriminator channel detection: Avalanche photodiodes with temperature compensation, A/D resolution 12 bits
Communication interface: RS-232
Signal Processing
Measurement resolution: 15 bits effective
Processor modes: Linear, with logarithmic or linear display option
Dynamic range, dB: 70
Bio-Plex Microplate Platform Specifications
Input voltage range: 100-240 V, 1.8 A, 47-63 Hz
Physical dimensions (W x D x H), cm: 44 x 61 x 8
Weight, kg/lb: 14.4 (32)
Communications interface RS-232
Plate capacity: One 96-well microtiter plate, ≤0.75