BMT CO2cell 50 CO2 Incubator, MMM Group (CAT#: STEM-CC-1203-LGZ)

The manufacturer of BMT CO2cell 50 CO2 Incubator is MMM Group. Model is CO2cell 50. This series of CO2CELLs is suitable for the study and growth of cells and other cultures, as well as for NO2. The operation is based on running a smooth gravitational flow of gas in an electrically heated chamber, with high relative humidity and selected gas concentrations. This three-circuit direct heating management system allows the need for fans to be eliminated, thereby greatly reducing the risk of vibration and cross-contamination, maximum relative humidity and absolutely dry interior walls and doors are guaranteed.

Condition: used
Chamber Volume: 50L
Working Temperature: 5 °C above ambient temperature up to 60 °C
Uncontrolled Relative Humidity: Up to max. 95 % RH at 37 °C
CO2 Concentration: 0.1 - 20%
Interior Dimensions: 63.2 x 44 x 68.6 cm
Exterior Dimensions: 76.5 x 73.4 x 86.2 cm
Control Accuracy: +/- 0.1 °C
Power Requirements: 580 W, 50/60 Hz, 220-240 V

1. Laboratory incubators - always create the right atmosphere.
2. The cabin volume is 50 liters.
3. Temperature range: 5°C ~ 60°C higher than ambient temperature.
4. Uncontrolled relative humidity: up to 90±5% RH at 37°C.
5. Carbon dioxide concentration: 0.2% ~ 20%.
6. CO2 Sensor: Unbiased Infrared Sensor (IR).
7. Wide selection of optional equipment and accessories.
8. Connect the output of a printer or PC.
9. Possibility of verification (IQ, OQ).

Binder C150-UL CO2 Incubator, Binder(CAT#-STEM-CC-2181-LGZ)
Boekel CCC 2.5a Complete Culture Control Incubator, Boekel Scientific(CAT#-STEM-CC-2182-LGZ)
BMT Climacell 222 Mechanical Forced Air Incubator, MMM Group(CAT#-STEM-CC-2183-LGZ)
BMT Climacell 222 ECO Mechanical Forced Air Incubator, MMM Group(CAT#-STEM-CC-2184-LGZ)
BMT Climacell 404 ECO Mechanical Forced Air Incubator, MMM Group(CAT#-STEM-CC-2185-LGZ)
BMT Climacell 707 Mechanical Forced Air Incubator, MMM Group(CAT#-STEM-CC-2186-LGZ)