BriskHeat BSAT051002 Temperature Controller, BriskHeat Corporation (CAT#: STEM-GLEPO-0299-ZJF)

The BriskHeat BSAT051002 Temperature Controller is manufactured by BriskHeat Corporation.
The BriskHeat® XtremeFLEX® BSAT heat tape features a built-in compact time percentage dial control which eliminates the need to purchase a separate controller. The time percentage controller varies the proportion (length) of time the heater is in the 'on' or 'off' heating mode. The heating application will determine the actual percentage set-point required. The controller does not use a temperature sensor and therefore satisfactory operation requires occasional supervision under changing load conditions. Moisture and chemical resistant silicone rubber makes up the extruded outer sheath. It has a uniform, fiberglass-reinforced, serpentine-wound multi-stranded heating element and is suitable for electrically conductive surfaces. Maximum exposure temperature is 450°F (232°C). The power density is 6.0watts/sq in (0.009watts/sq mm). BSAT silicone rubber heat tape provides exceptional heater flexibility, durability and uniformity with a rapid heat-up and thermal response. It is ideal for a wide range of temporary heating applications and surfaces such as laboratory, valves, facilities maintenance and more. It includes a 6ft (2m) long power cord with a 120V standard 2-prong NEMA 1-15 plug.
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Material: Silicone Rubber
Maximum Exposure Temperature: 450°F (232°C)
Power Density: 6watts/sq in (0.009watts/sq mm)
Width: 0.5in (13mm)
Length: 24in (610mm)
Total Watts: 72
Voltage: 120V
BriskHeat® #: BSAT051002

Width: 0.5-Inches (13mm); Length: 24-Inches (610mm); Total Watts: 72; Voltage: 120V
Moisture and chemical resistant silicone rubber makes up the extruded outer sheath
Uniform, fiberglass-reinforced, serpentine-wound multi-stranded heating element is suitable for electrically conductive surfaces
Includes a built-in compact time percentage dial control and a 6-Foot (2m) long power cord with a 120V standard 2-prong NEMA 1-15 plug
Requires occasional supervision under changing load conditions as the controller does not use a temperature sensor

Sterlco Sterl-Tronic S9016-J1 Temperature Control, Sterling Engineering Company
Temperature Control Skid, Unknown
Temperature Control Skid, Unknown
Temperature Control Skid, Unknown
GWK Teco ITC Temperature Controller, Gesellschaft Warme Kaltetechnik mbH (GWK)
Advantage Engineering Sentra VE Series Temperature Controller, Advantage Engineering, Inc.
Watlow 945A Digital Process/Temperature Controller Supplies - Quantity 3, Watlow
Single STL Series Water-Operated Temperature Control Unit, SINGLE Temperature Controls, Inc
Machine Solutions RK-300-100 Temperature Controller, AutoTherm