Carbolite® Wire Wound Single Zone Tube Furnace, AC/DC Input 120 V AC, Z654957, Carbolite Limited (CAT#: STEM-L-2879-Y)

These models utilize a resistance wire heating element which is wound around the outside of a ceramic work tube making it an integral part of the heating element. The thermocouple is located in a protective position between the outside of the work tube and the heating element, allowing the full work tube diameter to be used and protect the thermocouple from mechanical damage.

AC/DC input: 120 V, US 3-pin plug (AC)
Material: Ceramic
Features: thermocouple type N
Manufacturer: MTF 12/38/250
Calcium carbonate, M1238-250-230SN
Availability: Not available in the EU
Parameters: maximum 1200°C temperature
Total length: 300 mm
Tube inner diameter: 38 mm (1.5 inches)
Weight: 15 kg

• If the tube is required to contain an atmosphere or is likely to be contaminated by spillage, an additional work tube should be used.
• Fixed element tube mounted horizontally on a control box
• Tube furnace comes with Model 301 setpoint controller
• Heat up time 25 mins.