Catalyst FH10 Compact Single-Channel Pump, 300 rpm, 115/230 V, Cole-Parmer (CAT#: STEM-DS-0312-LC)

The Catalyst FH10 Compact Single-Channel Pump manufactured by Cole-Parmer is suitable for steady fluid delivery in analyzer and other low-flow laboratory pumping applications. The pump is easy to use, featuring reversible pumping, remote control, and fast change of tubing.

Control Type:Variable-Speed Analog
Min RPM:50
Max RPM:300
Number of Channels:1
Max Flow Rate (mL/min):50
Min Flow Rate (mL/min):0.07
Max Flow Rate Per Channel (mL/min):50
Min Flow Rate Per Channel (mL/min):0.07
Drive:Catalyst Compact Variable-Speed
Pump Head:Microflex
Tubing sizes accepted:Microbore; 0.19, 0.25, 0.51, 0.89, 1.14, 1.42, 2.06, 2.79 mm ID
Drive IP rating:IP 22
Duty Cycle:Continuous
Number of Rollers:3
Power (VAC):90 to 260
Power (amps):0.4A at 115v; 0.25A at 230v
Power (Hz):50/60
Width (in):5.25
Height (in):4.5
Length (in):6.75
Width (cm):13.4
Height (cm):11.4
Length (cm):17.2
Open-Head Sensor:No
Housing Material:Painted Steel
Remote Inputs:Start/Stop via Contact Closure

Polyphenylene sulfide (PPS), acetal, and copolyester pump head with four rollers made of stainless steel (SS)
Max button runs pump at 100% of maximum rpm—use to prime or flush tubing
Pumps accept continuous lengths of tubing for a clean, uninterrupted flow path with no fittings.
Separate single-turn speed control and cw/off/ccw switch
Reversible permanent magnet DC motor allows for bi-direction pumping of fluid
Remote control with a contact closure.
Pump head has average fixed occlusion for tubing, eliminating occlusion adjustment

Allegro™ I Peristaltic Pump System, Flow Rates Up To 1500 ml/min, KD Scientific (CAT#: STEM-DS-0040-LSY)
Allegro™ III Peristaltic Pump System, Flow Rates Up To 2000 ml/min, KD Scientific (CAT#: STEM-DS-0042-LSY)