Catalyst FH100 Peristaltic Pump for 1.6 mm Wall Tubing, 400 rpm, 115/230 V, Cole-Parmer (CAT#: STEM-DS-0300-LC)

The Catalyst Peristaltic Pump manufactured by Cole-Parmer is suitable for laboratory to pilot process scale-up applications. The pump allows for remote control of start/stop, speed and pumping direction. Only the tubing contacts the fluid, ensuring contamination-free pumping in high-purity applications.

Control Type: Variable-Speed Digital
Min RPM: 4
Max RPM: 400
Number of Channels: 1
Max Flow Rate (mL/min): 3000
Min Flow Rate (mL/min): 0.5
Max Flow Rate Per Channel (mL/min): 3000
Min Flow Rate Per Channel (mL/min): 0.5
Drive: Catalyst Precision Variable-Speed
Pump Head: FH100
Tubing sizes accepted: 1.6 mm wall; 0.8, 1.6, 3.2, 4.8, 6.4, 8.0 mm ID
Drive IP rating: IP 31
Power (VAC): 90 to 260
Number of Rollers: 3
Duty Cycle: Continuous
Power (amps): 1.6A at 115v; 1.9A at 230v
Power (Hz): 50/60
Width (in): 11
Height (in): 6
Length (in): 12.5
Width (cm): 27.9
Height (cm): 15.2
Length (cm): 31.8
Open-Head Sensor: Yes
Housing Material: ABS Plastic and Aluminum
Remote Inputs: 4 to 20 mA, 0 to 10 V; start/stop and direction via contact closure

Provides a complete integrated pump and drive system, reducing setup time
Contamination-free pumping
Intuitive keyboard for fast and easy adjustment of flow
Digital display of speed (rpm) to achieve accurate control and repeatability
Reversible motor allows cleaning of pipes before and after use
The pump head accepts a variety of pipe diameters to provide a wide range of flow rates
Unique "Quick Load" pump head enables rapid pipe loading and reduces downtime
When the pump head is opened to replace the oil pipe, the interlock switch will turn off the power
The remote control function is very suitable for automatic process applications

Allegro™ I Peristaltic Pump System, Flow Rates Up To 1500 ml/min, KD Scientific (CAT#: STEM-DS-0040-LSY)
Allegro™ III Peristaltic Pump System, Flow Rates Up To 2000 ml/min, KD Scientific (CAT#: STEM-DS-0042-LSY)