Cold Trap, Direct Cooling, Dimensions 506W x 730D x 1388H mm, 120Kg (CAT#: STEM-GLE-0902-LGH)

It can be used in capacitors, battery pole pieces, and battery chip drying systems.
It can be used as a pre-freezing tank and a low temperature tank.
The temperature display method is digital, which is convenient to observe the temperature of the cooling liquid in the cold trap tank, and to open the vacuum acquisition device in time.
The cold trap tank is made of 304 stainless steel, which can be used for experiments in aqueous and ethanol solutions. After configuring a glass condenser (cold trap bottle), it can be used in experiments with acid solutions and organic solvents.
Equipped with a drain valve for easy draining of collected fluid.

Minimum no-load temperature (℃): -80
Cooling method: direct cooling
Temperature display mode: digital display
Sensor indexing number: Pt100
Setting mode: arbitrary setting within the use temperature range
Safety protection: delay, over current, over heat
Dehumidification capacity: Max.4kg (water system)
Cooling capacity (W)-40℃: 400
Cooling capacity (W)-60℃: 200
Cooling capacity (W)-80℃: 60
Refrigerant, R404A and R23
Diameter of cold trap cavity (mm): ф220 ×240
Cold trap cavity material: 06Cr19Ni10
Diameter of vacuum pipe connection (mm): ф12 hose connection
Ambient temperature (° C): 5 to 35
Ambient relative humidity (%): ≤70
Overall power (W): 1602
Machine current (A): 7.3
Power supply: 220-240V ~, 50Hz
Overall dimensions (mm): 506W x 730D x 1388H
Net weight (kg) : 120

It can be used in capacitors, battery pole pieces, and battery chip drying systems.
It can be used as a pre-freezing tank and a low temperature tank.
The temperature display method is digital, which is convenient to observe the temperature of the cooling liquid in the cold trap tank, and to open the vacuum acquisition device in time.
The cold trap tank is made of 304 stainless steel, which can be used for experiments in aqueous and ethanol solutions. After configuring a glass condenser (cold trap bottle), it can be used in experiments with acid solutions and organic solvents.
Equipped with a drain valve for easy draining of collected fluid.