Constant Temperature And Humidity Box, Overall Dimensions 745×930×1695 mm, Internal Size 600×640×1050 mm, 1750 W, Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0395-LGH)

Constant Temperature And Humidity Box, BSC-400, Shanghai Boxun Medical Biological Instrument Corp.
1. The shell is made of cold rolled steel plate, the surface is electrostatic sprayed, the inner tank mirror stainless steel, the shelf can be adjusted arbitrarily;
2. Microcomputer intelligent control, liquid crystal display control temperature, humidity, time, over temperature alarm function;
3. The off-core fan is adopted, through the air duct design, the cold and hot are fully mixed and blown to the box body to ensure better temperature and uniformity;
4. Equipped with glass viewing inner door;
5. The left and right sides of the box are equipped with detection port joints, the inner diameter is 30mm, the outer diameter is 60mm;
6. Using international famous brand compressor, fluorine-free refrigerant, leading environmental protection, high efficiency, energy saving;
7. Can be cultured in a closed environment;
8. Standard mechanical lock to prevent arbitrary opening;
9. Integrated refrigeration system, multi-layer protection, safe operation and effective self-verification, the use of non-energy consumption unconventional automatic frost, avoid the impact on temperature, so that the equipment for a long time continuous use;
10. Humidity sensor using components, using fin humidification electric heat pipe humidification, with large capacity water tank, can be used continuously for a long time;
11. Programmable program design, 30 segments 99 cycles can be set;
12. With RS-485 interface;
13. It has the function of parameter memory and call recovery to protect data loss caused by power failure and crash.

Temperature control range: 0℃-60℃
Resolution: 0.1℃
Fluctuation: ±0.5℃
Uniformity: ±1℃ (37℃)
Humidity control range: 50%-90%
Humidity fluctuation: ±5%
Input power: 1750W
Timing range: 0-9999 minutes
Liner size (mm) : 600×640×1050
Dimensions (mm) : 745×930×1695
Load carrier: 4 pieces

Microcomputer intelligent control, liquid crystal display control temperature, humidity, time, over temperature alarm function;
The off-core fan is adopted, through the air duct design, the cold and hot are fully mixed and blown to the box body to ensure better temperature and uniformity;
Equipped with glass viewing inner door;