Determination of Glufosinate (GLUF) in Tea Infusions by Dual-Channel Capillary Electrophoresis following Solid-Phase Extraction (CAT#: STEM-ET-0159-ZJF)

Introduction

Glufosinate is a nonselective foliar herbicide used for broadcast burndown application before planting or prior to emergence of canola, corn, sweet corn, soybean, and sugar beet.
Tea is one of the most popular beverages in the world after water, and it is brewed by steeping tea leaves/buds in hot/boiling water to make tea infusions. The tea is cultivated in old orchards, which provide an ideal setting for weed development, which is progressively controlled by herbicides like GLYP or GLUF. Consequently, there is increasing concern that tea infusions may be a source of herbicide residues’ exposure to humans. Therefore, it is essential to determine the concentration of GLYP and GLUF and their primary metabolites aminomethylphosphonic acid (AMPA) and 3-(methylphosphinico)propionic acid (MPPA) in tea infusions.
This service provides two analytical procedures using dual-channel capillary electrophoresis-coupled contactless conductivity detection (CE-C4D) followed by solid-phase extraction (SPE) for simultaneous determination of glyphosate (GLYP), glufosinate (GLUF), and their two major metabolites, aminomethylphosphonic acid (AMPA) and 3-(methylphosphinico) propionic acid (MPPA), respectively, in a popular beverage such as tea infusions.

Add to Cart Please Inquire

Principle Applications Procedure Materials Notes Related Products

Principle

Capillary Electrophoresis (CE) is physical method of analysis which performs in a separation channel of elastic quartz capillary, under the influence of a high voltage direct current field. Charged analytes dissolved in an electrolyte solution are separated based on differences in mobility and/or distribution behavior of components. The migration velocity of an analyte under an electric field is determined by the electrophoretic mobility of the analyte and the electro-osmotic mobility of the buffer inside the capillary. The electrophoretic mobility of a solute depends on the characteristics of the solute (electric charge, molecular size and shape) and those of the buffer in which the migration takes place (type and ionic strength of the electrolyte, pH, viscosity and additives). Capillary electrophoresis provides greater resolution, higher sensitivity and online detection. It enables single-cell analysis and even single-molecule analysis, optimizing separation and analysis of biological macromolecules.

Applications

Biomedical, clinical, pharmaceutical, forensic, industrial, and food analysis

Procedure

1. Preparation: Preheat the capillary electrophoresis apparatus and flush the capillary with no voltage applied. Prepare mixed standard samples and buffer solution.
2. Sample Application: Put the appropriate amount of mixed standard samples in the sample tube at the corresponding position at the inlet of the capillary electrophoresis apparatus, and put the appropriate amount of buffer in the sample tube at the corresponding position of the apparatus.
3. Electrophoresis: Switch on the electrophoresis apparatus and set the voltage and program. Initiate automatic sampling, electrophoresis, and analysis.
4. Determination: Record and analyze the migration of each component. Capillary electrophoresis apparatus can be connected with various detectors to detect the separation. The most widely used is the UV-visible spectrophotometric detector. After the experiment, flush the capillary again.

Materials

• Capillary electrophoresis apparatus
• Sample solution
• Buffer solution

Notes

1. When an electric field is applied through the capillary filled with buffer, a flow of solvent is generated inside the capillary, called electro-osmotic flow (EOF). The reproducibility of CE separation will be seriously affected by small changes in EOF. For some applications, it is important to control EOF by modifying the inner wall of the capillary or by changing the concentration, composition and/or pH of the buffer solution.
2. The definition and automation of the injection process are critical for precise quantitative analysis. Modes of injection include gravity, pressure or vacuum injection and electrokinetic injection.
3. The employed electrolytic solution should be filtered to remove particles and degassed to avoid bubble formation that could interfere with the detection system or interrupt the electrical contact in the capillary during the separation run.
4. A rigorous rinsing procedure should be developed to achieve reproducible migration times of the solutes.

Other recommended products

Determination of Biogenic Amines (Histamine) in Human Urine by Capillary Electrophoresis-Tandem Mass Spectrometry (CAT#: STEM-ET-0057-ZJF)
Assessing the Energy Status of Low Numbers of Mammalian Cells by Capillary Electrophoresis–Mass Spectrometry (CAT#: STEM-ET-0164-ZJF)
High-Resolution Separation of Graphene Oxide by Capillary Electrophoresis (CAT#: STEM-ET-0299-ZJF)
Determination of Palbociclib in Pharmaceutical Dosage Forms by Capillary Electrophoresis (CAT#: STEM-ET-0183-ZJF)
Determination of Chlorogenic Acid by Pressure-Assisted Capillary Electrophoresis (CAT#: STEM-ET-0227-ZJF)
Targeted DNA Sequencing by Capillary Electrophoresis (CAT#: STEM-ET-0084-ZJF)
Separation of p-Hydroxybenzoic Acid (PHBA) in Tea by Capillary Electrophoresis-UV Analysis Using Silica-Layer Coated Capillary (CAT#: STEM-ET-0106-ZJF)
Analysis for Sulfadiazine (SDI) in Waters by Capillary Electrophoresis with Uv Detection (CAT#: STEM-ET-0016-ZJF)