Double Chip Interface H, dolomite (CAT#: STEM-ME-0382-WXH)

The Double Chip Interface H enables 2 chips of dimensions 15 x 22.5 x 4 mm to be interfaced together with a thin perfluoroelastomer gasket in between. The gasket provides 4 fluidic connections from chip to chip. This device can be used with 2 chips of any design, but the primary use is in double emulsion generation. Two Droplet Junction Chips (100µm etch depth) (one hydrophobic and one hydrophilic) are required for double emulsions.

Chip thickness: 4mm
Chip width: 15mm
Number of interface ports: 4
Number of tubing ports: 8
Operation pressure: 10bar
Operation temperature of seals and gasket: -15 °C to 250 °C
Provides a microchannel to microchannel connection between 2 chips
Enables microfluidic paths with different surface treatments to be created
Platform for double emulsion generation
Excellent chemical compatibility
Low dead volume connections
Quick to connect/disconnect
High visibility (excellent access for optics)

Male Mini Luer Fluid Connectors, Single Connector, Fluidic 331, microfluidic ChipShop (CAT#:STEM-ME-0146-WXH)
One-Wing Male Mini Luer Plugs, Low Volume Displacement Plugs, Fluidic 793, microfluidic ChipShop (CAT#:STEM-ME-0154-WXH)
Female Luer Lock Compatible Connectors, Fluidic 302, microfluidic ChipShop (CAT#:STEM-ME-0158-WXH)
Interaction Tanks, 4.5 ml, Fluidic 234, microfluidic ChipShop (CAT#:STEM-ME-0181-WXH)
Handling Frames with High Skirt, for the Spacing of a 1536 Microtiter Plate, microfluidic ChipShop (CAT#:STEM-ME-0188-WXH)
Oils, Droplet Generation, mcs-oil-10, microfluidic ChipShop (CAT#:STEM-ME-0196-WXH)