The manufacturer of the Drager Air-Shields RW82-1 Resuscitaire Infant Incubatoris Dräger. The Drager Air-Shields Resuscitaire RW infant warmer combines an effective warming therapy platform along with the components you need for clinical emergency resuscitation. The Drager Resuscitaire offers a blender, suction, flowmeter, and positive pressure mounted on the bed for easy accessibility. It features a Silica Quartz Heater that provides complete, even and quick heating. A parabolic reflector helps distribute the heat evenly over the entire mattress area. The product is located in Big Lake, MN, USA.
Specification
Condition: Certified Pre-owned Physical Attributes (Without Options / Accessories) Height: 72 in (183 cm) Width: 26.5 in (68 cm) Depth: 44 in (112 cm) Weight: (without options /accessories) 220–280 lbs (100–127 kg) Mattress Height From Floor: 39.4 in (100 cm) Width: 21.0 in (53.3 cm) Length: 26.0 in (66.0 cm) Thickness: 1.0 in (2.54 cm) Maximum Capacity: 15 lbs (4.54 kg) Maximum Power Requirements Model 120V: 120 V, 50–60 Hz, 750 W Model 220/240V: 220–240 V, 50–60 Hz, 750 W ) LED Examination Light Illumination: > 0.11 lumens / cm2 (100 ft. Candles) Controller Heating Alarms Check patient System alerts for 5 minutes in Manual Mode every 30 seconds after 10 minutes Baby temperature ±1° C from Set Point High temperature Skin Temp. 39.0 ±0.2 °C Probe Short or open circuit / No probe System fail Indicates System Fail Power fail AC Power Interruption Alarm Silence / Reset Intervals Check patient Resets clock for 10 minutes manual mode Baby temperature 10 minutes High temperature 2 minutes Procedural silence Presilences baby temp alarm for 5 minutes Set Temperature / Heater Output Set Temp Range: 34–38 °C (>37.0° override) Heater Output: 0–100%, 10% increments Skin Temp Display: 18–43 °C Accuracy: ±0.2 °C (31 to 37° C) Resuscitation Module Wall Supply Pressure: 40–75 psi (275–517 kPa) Cylinder Pressure: 2,900 psi max (19 994 kPa) Patient Gas Supply Flow Control Range: 0–15 LPM Airway Pressure Limit: Adjustable 0–50 cm H2O (0–4.9 kPa); Internal preset limit 60 cm H2O (5.9 kPa)
Features
Exceptional access from either side. Configure to your department's needs. Easily access suction. Efficiently adjust mattress position. Head of the warmer module can swivel up to 90 degrees. Automatic Pre-Warm Mode allows long-term, controlled warming of the mattress with no nuisance alarms.