Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

DW-960 High Vacuum Oil Pump, 200V/50Hz, ROCKER (CAT#: STEM-GLE-5942-LGZ)

Highlights

1. Low noise and low vibration.
PHIL Sato Vacuum's exclusive sliding surface design and high-precision processing technology make the vacuum oil pump have the characteristics of low vibration and low noise.
2. Gas ballast valve.

Cat Number: STEM-GLE-5942-LGZ

Application: Used for vacuum technology, vacuum drying, vacuum drying, heat treatment of vacuum unit group, vacuum deposition, ultra-high vacuum exhaust, vacuum infusion, etc.

Model: DW-960

Add to Cart



Description

DW series pumps are Direct Drive Rotary Vane Vacuum Pumps. The rotational speed of this type of oil pump is higher than that of the belt type oil pump. There is no need for belt design, and its rotational force will be directly transmitted to the vacuum pump, the operating power is strong, and it can eliminate environmental pollution and powder removal, and there is no belt operation and production wear and other problems.

Specification

Voltage / Frequency: 200V/50Hz
Exhaust speed (L/min): 800
Maximum vacuum (Torr): 5×10-4
Net weight: 115kg
Size: 837x325x576mm

Features

1. Low noise and low vibration.
PHIL Sato Vacuum's exclusive sliding surface design and high-precision processing technology make the vacuum oil pump have the characteristics of low vibration and low noise.
2. Gas ballast valve.
The high vacuum oil pump is equipped with a gas ballast valve as standard, which can speed up the extraction of steam without polluting the oil quality, and is very suitable for the process of operating water gas.
3. Oil backflow prevention mechanism.
The high vacuum oil pump is equipped with a special electric oil and gas check valve as standard, which will automatically release the pressure when the power is turned off. Unlike the general market check valve, it will not affect the overall flow.
4. Corrosion-resistant coating (Corrosion-resistance specifications).
The high vacuum oil pump has a special anti-corrosion material coating on the blade, which improves the pump's ability to resist corrosive gases and effectively improves the pump's service life.
5. Forced air cooling design.
The high vacuum oil pump has a forced air cooling design, which does not require additional cooling water, and can keep the pump at a suitable operating temperature.
6. Thermal protector.
The high vacuum oil pump is equipped with an overheat protection device as standard, which will automatically stop when the temperature is too high to prevent the motor from burning out and prolong the service life of the pump.

Related Products

Lafil 400 (220V, 50Hz) Oil-Free Vacuum Pump, 20 L/min, ROCKER (CAT#-STEM-GLE-5899-LGZ)
Rocker 300C, PTFE (110V, 60Hz) PTFE Coated Corrosion Resistant Vacuum Pump, 23 L/min, ROCKER (CAT#-STEM-GLE-5900-LGZ)
Rocker 300C, PTFE (220V, 50Hz) PTFE Coated Corrosion Resistant Vacuum Pump, 20 L/min, ROCKER (CAT#-STEM-GLE-5901-LGZ)
Rocker 400C, PTFE (110V, 60Hz) PTFE Coated Corrosion Resistant Vacuum Pump, 34 L/min, ROCKER (CAT#-STEM-GLE-5902-LGZ)
Rocker 400C, PTFE (220V, 50Hz) PTFE Coated Corrosion Resistant Vacuum Pump, 31 L/min, ROCKER (CAT#-STEM-GLE-5903-LGZ)
Rocker 410C, PTFE (110V, 60Hz) PTFE Coated Corrosion Resistant Vacuum Pump, 23 L/min, ROCKER (CAT#-STEM-GLE-5904-LGZ)