Electric Blast Drying Oven, Overall Dimensions 865×764×1017 mm, Internal Size 720×530×745 mm, 2750 W, 284 L, Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0290-LGH)

Electric Blast Drying Oven, BGZ-306, Shanghai Boxun Medical Biological Instrument Corp.
1. The shell is made of cold rolled steel plate, the surface is electrostatic sprayed, the inner tank mirror is stainless steel, the baffle can be adjusted arbitrarily;
2. The use of high quality insulation materials to make the performance of the machine more superior;
3. Rotating two-stage locking structure, to ensure that the door and seal fit higher, to achieve good sealing;
4. The four corners of the cavity are designed with rounded corners, easy to disassemble and easy to clean.
5. Using the newly developed PMMA ⅱ operating system, touch button, color liquid crystal display each parameter index, with temperature control, timing, programming, wind speed control, overtemperature alarm and other functions;
6. With countdown appointment function;
7. Programmable program design, can set 10 segments 100 cycles;
8. Preheating chamber design, air heating mixed directly into the studio, to ensure rapid heating and good heat distribution effect;
9. Adopts hood motor and vane, with air convection breeze device, air in the cavity can be renewed circulation;
10. Fan six speed regulation, can ensure the requirements of different wind speed, avoid dust sample dust caused by sample loss;
11. The call recovery function protects the device from data loss due to power failure or crash.

The power supply voltage: AC 220V±10%/50Hz±2%
Temperature control range: RT+5～300℃
Resolution: 0.1℃
Volatility: ±0.8℃（150℃）
Uniformity: 2%
Power: 2750 W
Timing range: 0～9999min/h
Appointment range: 0～9999min
Programming control: 10 segments 100 cycles
Volume: 284L
Internal size(mm): 720×530×745
Overall dimensions(mm): 865×764×1017
Bearing capacity of bracket: 15Kg

The use of high quality insulation materials to make the performance of the machine more superior;
Rotating two-stage locking structure, to ensure that the door and seal fit higher, to achieve good sealing;
The four corners of the cavity are designed with rounded corners, easy to disassemble and easy to clean.