Erlab Captair Flex XLS 633 Ductless Fume Hood, Erlab (CAT#: STEM-GLE-1177-LGZ)

The manufacturer of Erlab Captair Flex XLS 633 Ductless Fume Hood is Erlab. Model is Captair Flex XLS 633. CaptairFLEX XLS is designed to protect users from vapors and/or chemical particles emitted during application, providing a level of performance that will keep you safe while offering an environmentally friendly alternative to traditional plumbing systems. Based on Flex technology - a flexible and adaptable modular filter cartridge - this range of chemically protected housings offers a wide range of possibilities and allows you to perform a variety of applications in your laboratory. The Captair Flex XLS is designed to use up to 4 filter cartridges, which can be configured according to the protection needs of the specific application of the enclosure. The support structure consists of a corrosion-resistant metal alloy and is protected by a heat-hardening, acid-resistant, polymer coating. The optical viewing panel is formed from 1/4 inch thick acrylic and the filter module is formed from rigid polypropylene.

Condition: used
Number of columns: 3
Number of fans (IP44): 3
Processed air flow: 690 m3/h
Air velocity at the openings in working position: 0,4 to 0,6 m/s
Voltage / Frequency: 90 - 264 V / 50 Hz
Total power consumption including electricity for the lights: 57 -141 Watts
Amperage absorbed: 4,8 amp.
Air flow meter: Permanent air face velocity monitoring system
Flow monitor: Permanent ventilation control device according to EN 14175-2: 2003 standard
Internal lighting: Compact tubular fluorescent lighting - 18 Watts - 500 Lux - IP 67
Sampling port: For filter saturation detection (N/A if Molecode S installed)
Programmable timer: Timer - 60 hours setting by default
Energy ports: For the passage of cables
Metallic parts: Anti-corrosion metallic alloy protected by a thermo-hardened anti-acid polymer coating
Side and front panels: 6 mm thick acrylic
Filtration module: Polypropylene

1. Safe operation. The Erlab Captair 633 Smart is a 5ft (1620 mm) long ductless fume hood with AFNOR NFX 15-211 and SEFA 9 filtration efficiency standards (Class 1 and 2). Configurable filtration systems can be adapted to filter gases, solvents, powders and particulates, protecting users and laboratories from any toxic and harmful chemicals by circulating air safely and efficiently in the room.
2. Simple to use. Built-in smart technology enables visual light and audio communication to indicate the status of the hood. To remind you, the light will pulse and the audio pattern will indicate: impaired air circulation, fan failure and filter breakout.
3. Cost saving and simple maintenance. No ductwork costs, low compliance costs and significantly lower energy costs compared to ductwork. The Erlab Captain 633 smart fume hood consumes only 160 watts.

TopAir FH-190 Fume Hood, TopAir Systems(CAT#-STEM-GLE-1819-LGZ)
TopAir FH-200-PP Fume Hood, TopAir Systems(CAT#-STEM-GLE-1820-LGZ)
TopAir FH-200 Fume Hood, TopAir Systems(CAT#-STEM-GLE-1821-LGZ)
TopAir FH-220-PP Fume Hood, TopAir Systems(CAT#-STEM-GLE-1822-LGZ)
TopAir FH-220 Fume Hood, TopAir Systems(CAT#-STEM-GLE-1823-LGZ)
TopAir FH-250-PP Fume Hood, TopAir Systems(CAT#-STEM-GLE-1824-LGZ)