ESA Coulochem II 5200 Electrochemical Detector, ESA (CAT#: STEM-CPO-0477-ZJF)

The manufacturer of the ESA Coulochem II 5200 Electrochemical Detector, ESA is ESA.
Refurbished Esa Coulochem II 5200 electrochemical detector with ESA 5011 Analytical Cell (p/n 55-0434). Cell options available. This detector is designed to provide qualitative and quantitative information about the electroactive species in a sample which have been separated by HPLC.

Condition: Refurbished, Certified Pre-owned
Configuration Options: 1-4 potentiostats (Guard cell potentiostat standard feature)
Operating Modes: DC, Pulse, Scan and Timeline
Potential Range: +  2000 mV in 1 mV steps
Full Scale Current range: 100 pA to 100 µA in 1-2-5 sequence
Filter Time Constants: 0.2 to 10 seconds in 1-2-5 sequence (DC mode)
Noise Specifications: < 8 pA peak to peak with a 10 MΩ 2µF dummy load and a 2 second filter (DC mode)
Signal Output: +100 mV, + 1 V, + 10 V
Output Resolution: +  16 bit (30 µV at 1 V signal output)
Output Offset: + 100% of the selected current range in 1% steps
Guard Cell Potential: + 2000 mV in 1 mV steps
Event Marker: Triggered by independent front panel keypad, rear panel contact closures, timed operation or RS-232C control, 5% of full scale
Autozero: Triggered by independent front panel keypad, rear panel contact closures, timed operating or RS-232C control
Function Keys: Autozero, Event Marker, Cell In/Out, Run/Stop
RS-232C Interface Capability: Full parametric instrument control
Method Storage: Up to 10 methods for each mode of operation
Operating Temperature:  10 to 35°C
Humidity: 40 to 80% RH (10-35°C)
Storage Temperature: -10 to 60°C

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

ESA 584 HPLC Pump, ESA
ESA Coulochem III Electrochemical Detector, ESA
ESA DG4 Four-Channel Degasser, ESA