Fluke 5790A Automated AC Measurement Standard Calibrator Option 3 Wideband NG41 In Bloomfield, CT, USA, Fluke general analytical equipment (CAT#: STEM-GLEPO-1046-YJL)

Fluke 5790A Automated AC Measurement Standard Calibrator Option 3 Wideband NG41 In Bloomfield, CT, USA, model 5790A is manufactured by Fluke general analytical equipment.
The 5790A is compatible with A40 and A40A Current Shunts, which permit you to make ac/dc current transfer measurements up to 20A.
The 5790A may be used alone or as a transfer standard with an external dc source. In either case the normally tedious switching and calculations are performed automatically by the 5790A, and the resulting ac/dc difference is displayed directly on the easy-to-read vacuum fluorescent display.

Condition: Used
AC V Measurement
Range: 700 mV to 1000V; 10 Hz to 1 MHz
Best 1Year Specification: ± 24 ppm
Wideband Measurement
Range: 700 mV to 7V; 10 Hz to 30 MHz
Best 1Year Specification: ± 0.35%
Warm up Time: 30 minutes
Relative Humidity
Operating: 45% to 50°C; 75% to 45°C; 95% to 30°C
Storage: < 95% non-condensing
Altitude
Operating: 3,050 meters (10,000 feet)
Non-Operating: 12,200 meters (40,000 feet)
Temperature Performance
Operating: 0°C to 50°C
Calibration: 15°C to 35°C
Storage Temperature: -40°C to 70°C

Fluke 5790A Automated AC Measurement Standard Calibrator Option 3 Wideband NG42 In Bloomfield, CT, USA (CAT#: STEM-GLEPO-1047-YJL)
Fluke 754 Documenting Process Calibrator with HART Communication w/ accessories (CAT#: STEM-GLEPO-1053-YJL)
Fluke 9009 Calibration Industrial Dual Dry Well Block Calibrator -15C To 350C In Bloomfield, CT, USA (CAT#: STEM-GLEPO-1054-YJL)
Fluke FLK-LENS/TELE2 In Orlando, FL, USA (CAT#: STEM-GLEPO-1056-YJL)
Fluke Corporation FLK-TI10 In Orlando, FL, USA (CAT#: STEM-GLEPO-1063-YJL)
Fluke Calibration 5627A-9-P In Rochester, NY, USA (CAT#: STEM-GLEPO-1070-YJL)