FrameStar® 96 Well Non-Skirted PCR Plate, Low Profile, White Wells, Black Frame, 50 Plates, Azenta Life Sciences (CAT#: STEM-PCRE-1506-LC)

FrameStar® 96 Well Non-Skirted PCR Plate, Low Profile manufactured by Azenta Life Sciences is designed with rigid polycarbonate skirt to prevent warping and distortion during PCR, ensuring seal integrity and reducing sample lost due to evaporation. The wells of this low profile plate are shorter than those of standard profile plate (4ti-1000), reducing the "dead space" between the sample and the heated lid of the thermal cycler, which eliminates condensation on the side wall of the tube, preventing reduction in PCR volume and increasing the efficiency of the reaction. This is especially recommended for reaction volumes below 20µl.

Plate length: 120.00 ± 0.25mm
Plate width: 80.00 ± 0.25mm
Plate height: 15.60 ± 0.25mm
Well depth: 15.10 ± 0.25mm
Well diameter: 5.50 ± 0.10mm
Total well capacity: 0.2ml (200µl)
Working volume: <0.1ml (100µl)
Distance to center of A1 from top edge: 8.50 ± 0.25mm
Distance to center of A1 from left edge: 10.50 ± 0.25mm
Pitch (distance between A1 and A2): 9.00mm

Free from DNase, RNase, human genomic DNA, and endotoxin/pyrogen
Ultra smooth, thin wall for optimum PCR and real-time (RT-qPCR) results
Rigid polycarbonate frame for added mechanical stability and thermal stability
Significantly reduced thermal expansion and sample evaporation for improved consistency in PCR results
Alphanumeric grid reference to aid well and sample identification
Compatible with standard multichannel pipettes
Black frame with white wells for optimum signal-to-noise ratio