G-Trap™ SP Agarose Fast Flow is ready-to-use prepacked columns for the separation of proteins and other charge-based biomolecules. The resin in G-Trap™ SP Sepharose Fast Flow is a strong cation exchanger consisting of highly cross-linked 6% Sepharose beads plus thiopropyl (SP) strong cation exchange groups. Proteins with a net positive charge will bind to the resin, while proteins with a net negative charge will not bind and will flow out.
There are other G-Trap™ Ion Exchange Agarose Fast Flow columns available in 1 mL and 5 mL column volumes, namely G-Trap™ CM Agarose, G-Trap™ DEAE Agarose Fast Flow and G-Trap™ Q Agarose Fast flow. G-Trap™ CM Sepharose Express contains cation exchange resin and G-Trap™ DEAE Sepharose Express and G-Trap™ Q Sepharose Express contains anion exchange resin. The G-Trap™ Ion Exchange Selection Kit can be used for initial screening of suitable ion exchangers for purification of target proteins.
G-Trap™ Ion Exchange Agarose Fast Flow Columns can separate biomolecules on the basis of charge using prepacked columns. G-Trap™ Ion Exchange Agarose Fast Flow Columns are used for method detection, separation or purification of biomolecules, sample concentration and sample cleanup of charged molecules. Biomolecules carrying a net charge opposite to the ion exchanger bind to the ion exchanger and are thus separated from the bulk molecules in the sample.
Specification
Size: 5 columns
Features
G-Trap™ SP Agarose Fast Flow resin
Ion Exchanger: Strong cation exchanger Matrix: Cross-linked agarose beads, 6% Bead size: 45-165 µm Ligand: Sulphopropyl Ionic Capacity: 0.18-0.25 mmol (Na+)/ml Binding Capacity: 70 mg lysozyme /ml medium pH stability Working Range: 2-12 pH stability Cleaning-in-Place (CIP): 2-14 Maximum Flow Velocity: 450cm/h Recommended Flow rate: 1 ml/ min and 5 ml/ min for 1 ml and 5 ml column respectively Maximum Pressure: 0.3MPa Exclusion limit(globular proteins): 4 x 106 Chemical Stability: Stable to all commonly used aqueous buffers:1 M NaOH, 8M urea, 8M guanidine hydrochloride, 70% ethanol Storage Conditions: 4 to 30°C, 20% Ethanol containing 0.2M sodium acetate
G-Trap™ SP Agarose Fast Flow, 1 ml columns
Column Volume: 1 ml Columns Dimension: 0.7 x 2.5 cm Column Harware Pressure Limit: 0.5 MPa Column Hardware: Polypropylene (Biocompatible)
G-Trap™ SP Agarose Fast Flow, 5 ml columns
Column Volume: 5 ml Columns Dimension: 1.6 x 2.5 cm Column Harware Pressure Limit: 0.5 MPa Column Hardware: Polypropylene (Biocompatible)