Inquiry Basket

General Purpose AFM Probes, HQ:NSC15/Al BS, 325 kHz (40 N/m), MikroMasch (CAT#: STEM-M-0068-LKN)

Cat Number: STEM-M-0068-LKN

Application: Cantilevers of the 15 series are generally used in tapping mode for imaging hard samples, when high topographic and phase contrast are necessary. The 15 series is also good for non-contact AFM.

Model: HQ:NSC15/Al BS

Add to Cart

Description Specification Related Products

Description

MikroMasch General Purpose AFM Probes are suitable for most of the routine topography imaging experiments. Using these probes, lateral resolution down to 5 nm is attainable for scan size below 1 μm. Usually, sharpened silicon etched probes are used for general purpose measurements.

Specification

Typical radius of uncoated tip: 8 nm
Full tip cone angle: 40°
Total tip height: 12 - 18 µm
Probe material: n-type silicon
Probe bulk resistivity: 0.01 - 0.025 Ohm*cm
Detector coating: Aluminum

Related Products

General Purpose AFM Probes, HQ:NSC15/No Al, 325 kHz (40 N/m), MikroMasch (CAT#: STEM-M-0069-LKN)
General Purpose AFM Probes, HQ:NSC15/Cr-Au BS, 325 kHz (40 N/m), MikroMasch (CAT#: STEM-M-0070-LKN)

Other recommended products

Tipless AFM Probes, HQ:CSC38/tipless/No Al, 10 - 20 kHz (0.03 - 0.09 N/m), MikroMasch (CAT#: STEM-M-0134-LKN)
Tipless AFM Probes, HQ:CSC37/tipless/Cr-Au, 20 - 40 kHz (0.3 - 0.8 N/m), MikroMasch (CAT#: STEM-M-0130-LKN)
Conductive AFM Probes, HQ:DPE-XSC11, 15 - 350 kHz (0.2 - 42 N/m), MikroMasch (CAT#: STEM-M-0141-LKN)
Conductive AFM Probes, HQ:CSC17/Pt, 13 kHz (0.18 N/m), MikroMasch (CAT#: STEM-M-0102-LKN)
General Purpose AFM Probes, HQ:NSC18/Al BS, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0090-LKN)
Conductive AFM Probes, HQ:NSC18/Cr-Au, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0094-LKN)
General Purpose AFM Probes, HQ:NSC18/Cr-Au BS, 75 kHz (2.8 N/m), MikroMasch (CAT#: STEM-M-0092-LKN)
Long Scanning AFM Probes, HQ:NSC36/Hard/Al BS, 65 - 130 kHz (0.6 - 2 N/m), MikroMasch (CAT#: STEM-M-0117-LKN)

We use cookies to understand how you use our site and to improve the overall user experience. This includes personalizing content and advertising. Read our Privacy Policy

Accept Cookies