GP40 Gradient Pump, Dionex (CAT#: STEM-CPO-0795-ZJF)

The manufacturer of the GP40 Gradient Pump, Dionex is Dionex.
Refurbished Dionex GP40/GP-40 (model GP 40-1) Gradient Pump Dual-piston, variable speed, 100 µL stroke. Flow rate - 0.04 to 10.0 mL/min, in increments of 0.01 mL/min. Operating pressure: 35 MPa (5000 psi) maximum. (PEEK and stainless steel options available).
The GP40 Gradient Pump is an integral part of a DX 500 chromatography system. It is a microprocessor-based, dual-piston, variable-speed, gradient delivery system designed to blend and pump mixtures of up to four different mobile phases at precisely controlled flow rates. The pump can deliver the selected mobile phase composition isocratically, or as a multistep linear or curved gradient. A Digital Signal Processor (DSP) provides high speed control of pump flow and pressure. The GP40 can operate as a stand-alone product or with other Dionex modules as part of a complete chromatography system. It can also be used with non-Dionex modules that meet interface requirements for software, TTL, or relay control.
The GP40 can be controlled locally, using the front panel keypad and display, or from a remote host computer with a Dionex DX LANÔ interface installed and PeakNet software installed on the host computer. Limited remote control is also available from any device capable of providing compatible TTL signals to control the pump. The pump's two basic modes of control, Direct control and Method control, enable it to operate with or without reference to time-based events.

Condition: Refurbished, Certified Pre-owned
Main Power: 85 to 270 Vac, 47/63 Hz; 2.5 amps. The GP40 power supply is main voltage auto-sensing and requires no manual adjustment.
Fuse Requirements: Two 3.15 amp fast-blow IEC127 fuses
Environmental:
Operating Temperature: 10 °C to 50 °C (50 °F to 104 °F)
Operating Humidity: 5 to 95% relative humidity (non-condensing)
Eluent Selection: Four different mobile phase components; each can be proportioned from 0-100%
Pump: Dual-piston, variable speed, 100 µL (standard bore), 25 µL (microbore) stroke, user-selectable constant pressure or constant flow feedback control
Flow Rate Standard bore pump head: 0.04 to 10.0 mL/min, linearly variable in increments of 0.01 mL/min
Microbore pump head: 0.01 to 2.50 mL/min, linearly variable in increments of 0.01 mL/min
Operating Pressure: 35 MPa (5000 psi) maximum
Pressure Resolution: 0.07 MPa (10 psi)
High Pressure Limit:
0 to 35 MPa (0-5000 psi) in increments of 0.05 MPa (7.25 psi); trips instantaneously
Low Pressure Limit:
0. to 35 MPa (0 to 5000 psi) in increments of 0.05 MPa (7.25 psi); trips after a time-out of 0.4 mL for the standard bore GP40 or 0.1 mL for the microbore GP40
Display: Liquid crystal with adjustable backlighting.
Keypad: 26-button pad for entering commands and numerical values for screen parameters.
Dimensions (H x W x D): 33.5 x 22.5 x 42 cm (13.1 x 8.9 x 16.8 in) 6 cm clearance required behind the module
Weight : 19 kg (42 lbs)

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

EG50 Effluent Generator, Dionex
ICS-2500 Reagent Free Modular Ion Chromatograph System, Dionex
ICS-3000 Ion Chromatograph System, Dionex