The microfluidic chip roughly looks like a microscope slide, but with micron-thin internal channels. The micro channels are usually connected to an external pump to drive nano-liters of fluid into the microchannels by means of micro-bore tubes.
Specification
75.5 mm x 25.5 mm x 1.5 mm • Channel I Inlet & Outlet Width: 75 µm Middle Width: 75 µm • Channel II Inlet & Outlet Width: 75 µm Middle Width: 150 µm • Channel III Inlet & Outlet Width: 150 µm Middle Width: 150 µm • Channel IV Inlet & Outlet Width: 150 µm Middle Width: 300 µm Fluidic Interface: Mini Luer Material: PMMA, Topas