HH.CP Incubator-CO2, RT+5~50℃, 160L, Shanghai Huitai Equipment Manufacturing Co., Ltd (CAT#: STEM-CC-0114-YJL)

HH.CP Incubator-CO2, RT+5~50℃, 160L, model HH.CP-01-Ⅱ, is manufactured by Shanghai Huitai Equipment Manufacturing Co., Ltd. The large screen of the product adopts liquid crystal display, multiple sets of data are displayed on one screen, and the menu-type operation interface is simple and easy to understand and easy to operate.

Power supply: AC220V 50HZ/10A
Temperature control range: RT+5~50℃
Heating method: air jacket
Constant temperature fluctuation: ±0.2℃
Temperature resolution: 0.1℃
CO2 control range: 0~20℃
CO2 control method: Imported infrared sensor with microcomputer automatic control
Humidification method: natural evaporation
Working environment temperature: 5~30℃
Input power: 720W
Liner sizeW×D×H (mm): 500×500×650
Dimensions W×D×H (mm): 630×605×935
Volume: 160L
Load carrier (standard): 2pcs

Humanized design
Large-screen LCD display, multiple sets of data displayed on one screen, menu-type operation interface, simple and easy to understand and easy to operate. (Type II)
Stackable (two layers), easy to make full use of laboratory space, microcomputer controller, precise and reliable control of stainless steel liner and partition, four-corner semi-arc transition, shelf support can be freely installed and removed, easy to clean the studio.
Microbial high efficiency filter
The CO2 inlet is equipped with a high-efficiency microbial filter. For particles with a diameter greater than or equal to 0.3um, the filtration efficiency is as high as 99.99%, effectively filtering bacteria and dust particles in the CO2 gas. (optional)
door heating system
The CO2 incubator can heat the door to heat up the inner glass, which can effectively prevent the glass door from generating condensed water and prevent the possibility of microbial contamination due to the condensed water on the glass door.
Faster recovery of CO2 concentration ("II" type has this feature)
The monitoring of CO2 concentration by the infrared sensor is not affected by temperature and humidity. When the door of the box needs to be opened frequently during the experiment, the infrared sensor is the best choice. If the door is closed after 30 seconds of opening the door, it can return to the set temperature of 37°C in less than 10 minutes, and return to the set CO2 concentration of 5% in less than 5 minutes. Even if it is used by many people, it is necessary to open and close the door frequently. In any case, the CO2 concentration in the box can still be kept stable and uniform.
Equipped with a dedicated secondary pressure reducing valve for carbon dioxide incubators to effectively ensure the intake pressure
UV sterilization system (optional)
The ultraviolet germicidal lamp is located on the back wall of the box, which can regularly disinfect the inside of the box, which can effectively kill the circulating air in the box and the water vapor floating in the humidification tray, thereby effectively preventing the contamination during cell culture.
◆Independent temperature limit alarm system (optional)
⊕ When the temperature exceeds the limit, the operation will be automatically interrupted, and an audible and visual alarm will prompt the operator. To ensure the safe operation of the experiment without accidents.
◆Convenient data processing (optional)
⊕ With USB or RS485 interface, it can be connected to a printer or computer, and can record the changes of temperature parameters. (optional)

BPH Precision Constant Temperature Incubator （CAT#：STEM-CC-0089-YJL）
Precision Constant Temperature Incubator （CAT#：STEM-CC-0092-YJL）
Low Temperature Incubator （CAT#：STEM-CC-0093-YJL）
DHP Electro-thermal Constant-temperature Incubator （CAT#：STEM-CC-0105-YJL）
GHP Water-Jacket Thermostatic Constant Incubator （CAT#：STEM-CC-0109-YJL）
HH.CP Incubator-CO2 （CAT#：STEM-CC-0113-YJL）