High Pressure Hydrogen Generator, TH-500H10 (CAT#: STEM-GLE-0070-ZJF)

The TH-500H10 high-pressure hydrogen generator employs SPE solid electrolyte technology to directly electrolyze pure water, eliminating alkaline corrosion. It features imported ion membranes and low-sulfur silicone rubber seals to enhance gas quality, with gas-water separation and filters made of stainless steel for high pressure resistance. The generator integrates pressure and flow control and automatic water level control, shutting down automatically in low water conditions to protect the electrolytic cell. It can reach pressures up to 100Kg/cm² (approximately 10MPa) and can be used as reaction gas.

Hydrogen Purity: 99.999%
Hydrogen Flow Rate: 0-500ml/min
Output Pressure: 0-100Kg/cm² (Approximately 10MPa)
Pressure Stability: < 0.01MPa
Power Supply: 220V±10%, 50Hz
Power Consumption: 250W
Dimensions: 400×360×220mm
Net Weight: Approximately 26Kg

Utilizes SPE solid-state electrolyte technology.
No need for alkali; directly electrolyzes pure water without alkaline corrosion.
Utilizes imported ion membranes.
Internally uses low-sulfur silicone rubber rings to enhance gas quality. Gas-water separators, filters, and other components are made entirely of stainless steel for high-pressure resistance.
Integrated control of pressure and flow.
Automatic water level control; automatically shuts down in case of water shortage to protect the electrolytic cell and extend its lifespan.
Pressure can reach 100 Kg/cm2 (approximately 10 MPa), suitable for use as reaction gas.

High Pressure Hydrogen Generator, TH-500H5
High Pressure Hydrogen Generator, TH-500H7
High Pressure Hydrogen Generator, TH-1000H3
High Pressure Hydrogen Generator, TH-1000H5