Huamo BW-8040 Brackish Water RO membrane, 400ft2 (37.2m2), Huamo (CAT#: STEM-GMAE-4859-LGZ)

BW-8040 membrane element is a helically wound composite polyamide membrane element for brackish water treatment. These membranes are characterized by high operating feed pressure, typically 225psi (1.55MPa), and high salt removal (especially suitable for removal of TOC, SiO2, etc.), above 96.5%. These membranes are specially designed for industrial water treatment applications (NaCl ≤ 10,000ppm, salt content ≤ 6000us/cm), such as electronics factories, power plants, petrochemical, coal chemical, etc. that deal with brackish water and high salinity.

Active Membrane Area ft2 (m2): 400ft2 (37.2m2)
Average Permeate: 10,500gpd (40m3/d)
Stable Rejection: 99.5%
Min. Rejection: 99.3%
Spacer Net Thickness: 31mil (0.79mm)

Testing Conditions
Testing Pressure: 225psi (1.55MPa)
Temperature of Testing Solution: 25℃
Concentration of Testing Solution (NaCl): 2,000ppm
pH Value of Testing Solution: 7.5
Recovery Rate of Single Element: 15%

Operation Limits & conditions
Max. Feed Water Flow: 75gpm (17m3/h)
Max. Working Pressure: 600psi (4.14MPa)
Max. Feed Water Temperature: 45℃
Max. Feed Water SDI15: <5
pH Range of Feed Water During Continuous Operation: 2~11
pH Range of Feed Water During Chemical Cleaning: 1~13
Residual Chlorine Concentration of Feed Water: <0.1 ppm
Max. Pressure Drop of Single Element: 10psi (0.07MPa)
Max.Turbidity NTU: 1.0

Huamo GM-C series Commercial Water Filters RO Water Purification System, 200G - 1200G, Huamo (CAT#-STEM-GMAE-4865-LGZ)
Huamo BW-4040 Brackish Water RO membrane, 78ft2 (7.2m2), Huamo (CAT#-STEM-GMAE-4860-LGZ)
Huamo HF-MBR-6-PVDF MBR Membrane, 6m2, Huamo (CAT#-STEM-GMAE-4861-LGZ)
Huamo HF-MBR-10-PVDF MBR Membrane, 10m2, Huamo (CAT#-STEM-GMAE-4862-LGZ)
Huamo HF-MBR-15-PVDF MBR Membrane, 15m2, Huamo (CAT#-STEM-GMAE-4863-LGZ)
Huamo 250LPH 500LPH 1000LPH Seawater Desalination RO System, Disinfection, Huamo (CAT#-STEM-GMAE-4864-LGZ)