Infant Incubator BJPX-3101, Biobase (CAT#: STEM-RAFAE-0001-LKN)

Biobase Infant Incubator BJPX-3101 provides newborns with a temperature and humidity adjustable environment similar to that of the mother's womb, which does not apply to the transfer of the baby.

General Parameters
Power Supply: AC220-230V/50Hz, 1300VA
Maximum heater output power: 350W/240V
Auxiliary power output: AC220-230V/50Hz, 3A
Heater instructions: 0~100%
Temperature control mode: Box temperature mode; infant mode
Box temperature control temperature range: 25~37°C; 37~39°C(Leapfrogging Mode)
Skin temperature control temperature range: 34~37°C; 37~38°C(Leapfrogging Mode)
Sensor temperature display range: 5~65°C
Warm-up time(ambient temperature is generally + 22 °C)*: No more than 40 minutes
Temperature variability: No more than 0.5°C
Temperature uniformity (the mattress is in a horizontal position): No more than 0.8°C
Temperature uniformity (the mattress is in an inclined position): No more than 1.0°C
The difference between average incubator temperature and control temperature: No more than 1.0°C
Skin temperature sensor accuracy: ±0.2°C

Humidity Control
The running time of the water tank is filled with distilled water after: Humidity below 70%RH, at least 24 hours
Tank capacity: 1200ml
Humidity display range: 0%RH~99%RH
Humidity control range: 0%~90%(Adjust 1% each time)
Humidity control precision: ±5%RH
Humidity display accuracy (ambient temperature 25°C, ambient humidity 45%RH + 5% RH): ±5%RH
Note: in the context of a fairly high ambient humidity, it may not be possible to achieve a relatively low humidity control

Oxygen Concentration Control
Oxygen concentration display range: 0%~99%
Oxygen concentration display resolution: 0.01
Oxygen concentration setting range: 20%~60%(Adjust 1% each time)
Oxygen sensor service life: Use up to 10,000 hours at 100% oxygen concentration

Ambient Temperature
The scope of work: +20~+30°C
Transportation and storage: -20~+55°C

Relative Humidity
Relative humidity operating range: 30%~75%RH
Transportation and storage: No more than 93%RH

Atmospheric Pressure
Transport and storage atmospheric pressure range: 500hPa~1060hPa
Working atmospheric pressure range: 800hPa~1060hPa
Applicable Environment Altitude: ≤2000m
Overvoltage category: Ⅱ
Pollution Level: 2

Air Flow Rate
Ambient air flow rate: Less than 0.3m/s

Other Indicators
Ambient noise in constant temperature enclosure: The stable temperature is not more than 45dB (A); In other states is not more than 50dB (A); Ambient noise is not more than 35dB (A).
Ambient carbon dioxide concentration in constant temperature enclosure: Carbon dioxide gas mixture is injected at the speed of 750ml/minute right above the mattress about 10cm, the density should be under 0.5%.
Air velocity above the crib mattress: No more than 0.35m/s

General Alarm
Power off alarm, fan alarm, sensor alarm, deviation alarm, over temperature alarm, sensor box placement error alarm, water tank placement error alarm, water shortage alarm.

System Alarm
ROM alarm, internal alarm system, SRAM alarm, EEPROM alarm, real-time alarm, communication alarm, ADC alarm, keyboard alarm, battery alarm, LCD display alarm, temperature heating system alarm, humidity heating system alarm.

Infant Incubator BK-IN 1 Pro, Biobase (CAT#: STEM-RAFAE-0002-LKN)