Large CO2 Shaking Incubator - Refrigeration Function - Humidity Control - HEPA Filter, Single Layer, 50Kg, Shanghai Yiheng Scientific Instruments Co., Ltd (CAT#: STEM-CC-0087-YJL)

Large CO2 Shaking Incubator - Refrigeration Function - Humidity Control - HEPA Filter, Single Layer, 50Kg, model BPNZ-700CS(Single Layer) is manufactured by Shanghai Yiheng Scientific Instruments Co., Ltd. The CO2 shaking incubator is developed based on the company's more than ten years of design and manufacturing experience in the field of carbon dioxide incubators and constant temperature shaking incubators, based on the needs of users and continuous technological innovation.

Controller: Color touch screen controller
Abnormal Work Alarm: standard
Oscillation Frequency: 40-300rpm
Oscillation Precision: ±1
Amplitude: 26mm
Drive Mode: Three eccentric shaft balance drive type
Allowable Shock Bearing Weight (Including Clamps): 50Kg
Temperature Range: 4~65℃(Ambient temperature dropped by 20℃)
Temperature Control Precision (Stability): ±0.1℃
Temperature Uniformity: ±0.5°C (ambient temperature 37°C)
Heating Method: six-sided heating
CO2 Control Range: 0~20%
CO2 Recovery Time: (recovery to 5% within 30 seconds of opening the door) ≤ 3 minutes
CO2 Control Precision: ±0.1%
CO2 stability at 5% CO2: ±0.1%
CO2 Uniformity: ±0.1%
CO2 Sensor: Infrared CO2 Sensor
Humidity Control: 50%~95%RH
Humidity Control Precision at 37℃: The humidity in the chamber at 37°C can reach 85%~95%, and the humidity is controlled in real time.85%~95%，Humidity Real-time Control
Humidity Resolution: 0.1%RH
Humidity Deviation: ±2%
Disinfection Method: 90℃ high temperature moist heat disinfection
Timing Range: 0~99 h 59 min
Pan Size(mm): 920×500
External DimensionsW×H×D(mm): 1200×1370×875
Power Consumption(Single): 2350W(with refrigeration)
Power Consumption: 220V 50Hz
Optional Configuration (Number of Erlenmeyer Flask Fixing Clips): 50ml×116, 250ml×45, 1L×18

Humanized design
● CO2 shaking incubator, which integrates CO2 incubator and shaking incubator, has the advantages of small footprint and large bottle capacity.
● Large-screen LCD display, one-screen display of various parameters, single-operated operation interface, simple and easy to understand and easy to operate; the operation interface has a password lock function to prevent human misoperation; and has timing and power-on/off functions.
● Brand new environmentally friendly design, imported brand compressor and circulating air speed, high efficiency, low energy consumption, low noise, not only promote energy saving, but also have a long service life, compared with traditional cooling equipment, the cooling time can be reduced by more than 30%.
● The inner tank, vibrating table and shelf are all made of 304 stainless steel, with semi-circular design at four corners. The inner tank wall has been electrochemically treated, which can resist corrosion and prevent bacterial growth, ensure durability, and facilitate cleaning and disinfection.
● A variety of special cradles and fixtures are available, and the replacement of cradles and fixtures is very easy, which greatly improves work efficiency.

Carbon dioxide monitoring and control system
● Adopt imported infrared sensor, which has the characteristics of fast monitoring of carbon dioxide gas, high accuracy, and is not affected by fluctuations in external temperature and humidity. Even if many people use it, and need to open and close the door frequently, it can still keep the CO2 concentration in the box stable. and uniform. Users only need to connect the CO2 gas source to use it directly.
● The CO2 inlet is equipped with a high-efficiency microbial filter, which can filter up to 99.99% of particles with a diameter of ≥0.3μm, which can effectively filter bacteria, fine dust particles and microbial pollution sources in the CO2 gas.

Guaranteed continuous operation
● Low heat dissipation DC motor, large starting torque, wide speed regulation, maintenance-free, breaking through the defect that the existing domestic oscillator cannot run continuously for a long time. Three eccentric shaft balance drive
● Three eccentric shafts balance the drive process to ensure that the samples on the CO2 shaking tray all oscillate at the same speed. The heavy-duty and durable structure design ensures that our CO2 oscillators can show strong power even under full load and high speed.
● The speed of the circulating fan can be automatically controlled. When the temperature in the box is at a constant temperature, the speed will be reduced, and the circulating wind speed will be adjusted to the wind speed suitable for cell growth to avoid volatilization of the sample due to excessive air volume during the test.

Temperature and humidity control system
● Choose a temperature and humidity sensor that can operate at high temperature to ensure accurate temperature and humidity control in the box. At the same time, the temperature and humidity of the experiment can be restored in a short time after the user opens and closes the door for sampling and stakeout.

Control box door with shaking tray
● The box door is equipped with a hollow tempered observation window, which is convenient for the operator to observe the test state without opening the door. The box door has a heating function, which can prevent the observation window from producing condensed water and prevent the possibility of microbial contamination caused by the condensed water.
● In the working state, the operator can open the door of the box at any time, and the carbon dioxide shaking incubator will temporarily stop working; after the shaking stops, the operator can open the shaking tray and the lock, and easily pull out the shaking tray along the slide rail, the operation is simple, Fast, safe and easy to clean.

Ambient temperature monitoring system
● Independent ambient temperature detector, which can automatically adjust the heating system of the CO2 incubator according to the changes of the ambient temperature in the experiment, so as to avoid the overshoot of the temperature in the incubator.

Convenient data processing (optional)
● It can be connected to a printer or 485 communication interface, and the temperature and time curve can be recorded with a computer and a printer, which provides a strong guarantee for the storage and playback of the test process data.

HEPA high efficiency filter (optional)
A. Microbial high efficiency filter
● The CO2 air inlet is equipped with a microbial high-efficiency filter. For particles with a diameter of ≥0.3μm, the filtration efficiency is as high as 99.99%, and it can effectively filter bacteria and dust particles in the CO2 gas.
B. HEPA high efficiency filter
● The gas quality in the CO2 incubator is an important indicator to measure the cell culture environment. The HEPA high-efficiency filter can effectively filter out bacteria and dust particles in the outside air, eliminate and prevent cross-contamination between the outside air and the inside of the incubator, so that the inside of the incubator is always in a sterile state. After the door is closed for 5 minutes, the air quality in the box can quickly return to the 100-level clean level. The HEPA filter is easy to assemble and disassemble without tools.

Hierarchical authority management (optional)
● With multiple assignable personal accounts, according to the needs of equipment management, the operation authority of the equipment controller can be assigned to three authority level accounts of administrator, operator and visitor. The touch screen also supports Chinese and English input, and can log in to the system according to the actual name of the operator. At the same time, the system also has the operation log query function, which records the detailed operation log of each user, which is convenient for equipment operation and maintenance management and audit tracking.

Sterilization system
A. 90℃ high temperature moist heat sterilization system
● It can thoroughly sterilize the inner chamber (including temperature sensor, carbon dioxide concentration sensor, fan, clapboard and bracket) with high temperature and humidity, and completely eliminate the microbial contamination caused by bacteria, mold, mycoplasma and other microorganisms to cell culture. , to provide users with a safe experimental environment.
● Simple operation: the user only needs to simply press the (sterilization start) button on the control panel, the sterilization system can completely clean all the components in the box (including temperature sensor, carbon dioxide concentration sensor, fan, partition and bracket). sterilization. The entire sterilization process takes 18 hours to ensure comprehensive and efficient sterilization.

security function
● Independent temperature limit alarm system, sound and light alarm can prompt the operator to ensure the safe operation of the experiment without accidents.
● It has low, high and over-temperature alarms for temperature and rotation speed, and alarms for CO2 concentration too high or too low.
● Equipped with safety facilities such as an alarm for long time opening the door and a reminder of the working state of ultraviolet sterilization.
● When the box door is opened, the breeze circulation, heating and shaker stop automatically, without the disadvantage of temperature overshoot.
● The unique speed control circuit can ensure the smooth start of the shaker and prevent the instrument from being damaged due to splashing of liquid.
● Independent temperature limit alarm system, automatically cut off the heating when the temperature exceeds the limit, to ensure safe operation without accidents.
● The speed of the circulating fan is automatically controlled, which can avoid volatilization of the sample due to the excessively fast circulating fan during the test.
● Can be equipped with RS-485 interface and USB data transfer interface (U disk), by connecting to a computer, monitoring temperature, speed, time and alarm. (optional)

C02 Shaking Incubator(CAT: STEM-GME-0045-YJL)
C02 Shaking Incubator(CAT: STEM-GME-0046-YJL)
BPN-RHP/RWP Series CO2 Incubator Top Grade Type/Color Touch Screen(CAT: STEM-GME-0049-YJL)
BPN-RHP/RWP Series CO2 Incubator Top Grade Type/Color Touch Screen(CAT: STEM-GME-0050-YJL)