◆Humanized design
● Brand new fluorine-free design, green and environmental protection keeps you at the forefront of healthy life.
● Humanized touch keys, menu operation, intuitive and clear, multiple parameters can be displayed on the same screen.
● Adopt mirror-surface stainless steel liner with semi-circular arc transition at four corners. The partitions or partitions in the box can be disassembled without tools, which is convenient for disinfection and cleaning of the studio.
● Large-screen LCD display, multiple groups of data displayed on one screen, menu-type operation interface, simple and easy to understand, easy to observe and operate.
● 30 groups of programs can be set, and the time range of each group is 1~99 hours and 59 minutes (standard).
● Can be added: with CO 2 inlet (promoting plant growth) and CO 2 controller. (Imported infrared CO 2 sensor)
What are the advantages of LED light sources?
● No thermal interference: LED beams do not generate heat and extract useful light that is beneficial to plant growth.
● Energy saving and environmental protection: The energy consumption of LED light source is extremely low, which is about 80% lower than that of ordinary light source, so the power consumption is extremely low.
● Small size: LED light source has the characteristics of miniaturization, planarization and strong designability.
● Stable and long service life: Provide accurate and stable illumination, the service life can reach more than 30,000 hours, and the photoelectric conversion efficiency is high.
● Fast response speed: top-mounted plane illumination is optional to ensure that the culture can absorb the light source fully and evenly, and to maintain the consistency of the experimental results.
◆Intelligent control technology
● It can simulate the temperature changes of nature during the day and night, and it can also simulate the multi-directional light source of nature
● The parameters set by the user can be automatically stored in the event of a power failure, and the original setting program will run after the power is turned on
● The size of the circulating wind speed is automatically controlled, which can avoid blowing down the plant seedlings due to the excessively fast circulating wind speed during the test.
● LED light incubator/artificial climate box is equipped with various LED light sources suitable for plant growth, and the spectral structure is consistent with the existing literature data
◆Intelligent multi-stage programmable control
● Program control temperature, humidity, illuminance, time, simplify the complex test process, and truly realize automatic control and operation.
◆Continuous operation technology
● Two sets of international brand compressors are automatically switched in turn to ensure long-term operation of plant cultivation without failure, breaking through the defect that the existing light incubator/artificial climate box cannot operate for a long time.
◆Security function
● Equipped with an independent temperature limit alarm system, it will be automatically interrupted when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (standard)
● When the light box or artificial climate box fails, the LCD screen will display the failure information, and the operation failure will be clear at a glance.
● High or low temperature alarm.
CO2 concentration monitoring and control (optional) (CO2 control range 0~10%)
● For plant light cultivation, infrared sensor is an ideal choice, because the recovery of CO2 concentration of infrared sensor is not affected by temperature and humidity, the infrared sensor can respond to changes in CO2 concentration within a few seconds, and the control accuracy is accurate reliable.
Data control system (optional)
● RS485 or USB interface and software.
● Realize data recording, data communication, graphic dynamic display, fault analysis.
● Optional printer system for data recording, in line with GMP standards.