MAC 10® LEAC2 Fan Filter Unit, 2'×2', 115 V, 555 ft³/min, Envirco (CAT#: STEM-C-0416-ZJF)

MAC 10® LEAC2 Fan Filter Unit manufactured by Envirco provides clean air for critical environments, with extra low noise, low consumption, low profile and high airflow.
The MAC 10® LEAC2 Fan Filter Unit is the first to combine extra low noise, low consumption, low profile and high airflow.
The MAC 10® LEAC2 offers one of the lowest power consumption in the industry. The unit operates at less than 208 watts @ 90 fpm, which reduces operating costs by consuming less than conventional FFUs.
The MAC 10® LEAC2 has a low profile of less than 13" (330 mm) for standard model.
The MAC 10® LEAC2 standard filter is integrated with the unit housing, room side replaceable filters and motor blower are optional.
The MAC 10® LEAC2 has a solid-state speed control and operates against high external static pressure with exceptional filter life.
The MAC 10® LEAC2 maintains uniform airflow by utilizing a unique combination of motor blower technology and Envirco®'s proprietary baffling system.

Brands: Envirco®
Optional Duct Inlet Connection Size:
10 in (254mm)
12 in (305mm)
14 in (356 mm)
Voltage: 115 V
Frequency: 50 Hz/60 Hz
Phase: 1
Full Load Current: 1.8 A
Filter Housing Material: Mill Finished Aluminum
Industry Standards / Certifications: cUL listed (115 V, 208-240 V, 277 V) with standard UL 900 filter, File number E152685 (UL507)
Filter Type: High Efficiency Particulate Air (HEPA): 99.99% at 0.3µm
External Static Operating Pressure: 1.0 inWg 200 Pa
Orientation: Horizontal

Performance
Nominal Unit Size: 2'×2'
Active Filter Face Area: 2.3 ft²
Maximum Air Flowrate: 555 ft³/min
Energy Consumption Rate at Maximum Air Flowrate: 198 W
Air Flowrate at 90 Feet per Minute (ft/min) Average Speed: 210 ft³/min
Energy Consumption Rate at 90 Feet per Minute (ft/min) Average Speed: 160 W
Unit Weight: 42 lb
Note
Do not operate 2'×2' units above 400 SCFM. Damage to the filter and/or particle bleed-through can occur.
Performance tested in accordance with the (ANSI/AMCA 210-07), (ANSI/ASHRAE 51-07) test standards for Certified Aerodynamic Performance Rating.
90 fpm values based on active filter face area. BTU = Watts × 3.413.

Dimensions
Dimension A: 23.63 in (600mm)
Dimension B: 23.63 in (600mm)
Dimension C: 14.61 in (371mm)

Options
Modbus Equipped Variable Speed Control Card (ENAC) compatible with Envirco® control systems
Duct Collar (shipped loose) 10" (254 mm) , 12" (305 mm) and 14" (355.6 mm) for direct connection to the air conditioning supply
Airflow Indicator Light for external monitoring of motor operation. Green indicator indicates normal operation.
Filter Load Indicator Light
Pressure Transducer for continuous filter monitoring
Flow-through light fixture provides illumination with minimal airflow disruption
Powder coat white paint or stainless steel housing
Room-side 3/8" Challenge Ports: convenient aerosol challenge and HEPA filter testing
ULPA 99.9995 % at 0.12 µm PTFE and low boron
3/4" Knife Edge for easy placement in gel track ceiling grid system (only RSRE units)
MERV 8 pre-filter available
Stainless Steel Diffuser Screen

Low consumption, low profile and low operating costs
3 Speed Solid State Speed Control not available for LEAC 2'×4' units
Integrated PSC Motorized Backward Inclined Impeller
Walkable Plenum rated 250 lbs without prefilter
Snap-in 20"×20" washable prefilter
In accordance with IEST recommended practices IESTRP-CC036.1
Aluminum Diffuser Screen (RSRE)
Room-side Challenge Ports standard on RSRE
Room-side Replaceable Filter and Motor Assembly standard on RSRE

MAC 10® LEAC2 Fan Filter Unit, 2'×2', 220 V, 555 ft³/min, Envirco
MAC 10® LEAC2 Fan Filter Unit, 2'×2', 277 V, 555 ft³/min, Envirco