Masterflex I/P® Digital Washdown Modular Drive with Easy-Load® Pump Head for Precision Tubing, 6 to 650 rpm; 115/230 VAC, Cole-Parmer (CAT#: STEM-DS-0116-LC)

The Masterflex I/P® Digital Modular Dispensing Pump System manufactured by Cole-Parmer is suitable for metering and critical transfer applications. I/P® modular drive features powerful motors, speed display, and accurace speed control as low as ±0.25%.

Control Type: Variable-Speed Digital
Pump Series: I/P
Min RPM: 6
Max RPM: 650
Number of Channels: 1
Max Flow Rate Per Channel (LPM): 8
Min Flow Rate Per Channel (LPM): 0.06
Max Flow Rate Per Channel (mL/min): 8000
Min Flow Rate Per Channel (mL/min):60
Drive:07591-30 (I/P® Variable-Speed Wash-Down Modular Drive)
Pump Head:77602-10 (I/P® Easy-Load Pump Head)
Tubing:06434-73, 10-ft (C-FLEX® Ultra, I/P® 73)
Tubing sizes accepted:I/P® 26, 73, 82
Drive IP rating:IP 66
Washdown Capable:Yes
Number of Rollers:3
Power (VAC):90 to 260
Power (amps):4.4A at 115v; 2.2A at 230v
Power (Hz):50/60
Width (in):7
Height (in):6.5
Length (in):14.25
Width (cm):17.78
Height (cm):16.51
Length (cm):36.2
Open-Head Sensor:No
Housing Material:Painted Aluminum Controller; Painted Steel and Aluminum Drive
Remote Inputs:4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure

Digital interface with LED display for clear confirmation of speed setting
Analog communication for remote control of voltage, current and contact closure
Powerful motor allows for stack of two pump heads to increase flow rate
Control speed, direction, and start/stop via membrane keypad

Masterflex I/P® Digital Drive with Cloud-Enabled MasterflexLive™, Open-Head Sensor, and Cytoflow® Pump Head for Precision Tubing, Stainless Steel Housing, Cole-Parmer (CAT#: STEM-DS-0117-LC)