METTLER XPE26DR Microbalance, Range 5.1g/22g, SHANGHAI SHENGUANG INSTRUMENT CO.,LTD (CAT#: STEM-GLE-5737-LGZ)

1. Suitable for accurate weighing of micro samples:
Are your samples extremely expensive? Are your sample volumes very small? Or do you want to add microsamples directly into large tare containers? XPE microanalytical balances are especially suitable for the accurate weighing of small samples. The XPE56 microanalytical balance has a readability of 1µg, weighs up to 52g, and offers a high resolution of 52,000,000. The XPE56 is extremely sensitive and durable, making it ideal for weighing micro samples directly into large tare containers
2. Static DetectTM:
The innovative technology automatically detects static charges, allowing weighing errors to be assessed. A warning is given if user-defined limits are exceeded. For maximum process safety, users can eliminate static electricity to ensure accurate results.
3. StatusLightTM Status Indicator:
The StatusLight status indicator shows the status of the balance visually by color. Green is ready, yellow is warning, and red is error. Clearly shows whether the balance is ready to start a weighing task.
4. Easy to clean:
The inner and outer draft shields can be completely disassembled in seconds, ensuring easy, fast and efficient cleaning tasks.
5. LabX – weighing process under control:
LabX laboratory software provides flexible SOP user guidance on the balance touch screen. Automatic data processing, calculations and report generation to avoid transcription errors and ensure full traceability

Maximum weight: 5.1g/22g
Readability: 0.002mg/0.01mg
Repeatability (sd, at loading): 0.008mg (20g)
Repeatability (sd) (5% loading): 0.002mg
Linearity error: 0.01mg
Sensitivity drift (check weight): 0.1mg (20g)
Sensitivity temperature drift1: 0.0001%/°C
Sensitivity stability2: 0.0001%/a
Typical value
Repeatability (sd) (5% loading): 0.0012mg
Linearity error: 0.005mg
Sensitivity drift (check weight): 0.03mg (20g)
Minimum weight value (5% loading, k=2, U=0.10%): 2.4mg
Minimum weight value (5% loading, k=2, U=1%): 0.24mg
Stability time: 3.5s/2.5s

It adopts high-resolution rear-mounted sensor and built-in two sets of calibration weights to meet the user's high-precision weighing needs.
StatusLightTM status indicator, which visually displays the status of the balance by color.
SmartScreenTFT color touch screen with Chinese interface for safe and convenient balance operation.
SmartSens infrared sensor, realizes weighing operations without hand contact: opening and closing doors, printing, peeling, etc.
SmartGrid hanging grid weighing pan for fast and accurate weighing results.
ErgoClip Basket Micro is easy to weigh parts, place the peeling container safely, and effectively shield the influence of static charge.
StaticDetectTM electrostatic detection technology detects static charge on the sample and/or container and provides a warning.
LevelGuide level wizard that provides warnings when the balance is not level and displays full instructions and/or green real-time graphical level bubbles on the touch screen.
SmartTracTM dynamic graphic display, directly display the weighing range used by the balance.
ProFACT professional-grade automatic calibration technology, automatic built-in weight correction and linear correction triggered by temperature drift and time setting, to obtain accurate weighing results.
1ITC internal temperature control to reduce the influence of temperature on weighing results.
1User Management user management function, set the access rights of different balance menus.
1MinWeigh function to provide weighing assistance in compliance with quality regulations (requires METTLER TOLEDO customer service engineer on-site setting to activate).
1TestManagerTM test manager built-in firmware for SOP-compliant daily testing.
1Optimize the adaptive weighing parameter settings of the balance to meet the requirements of different weighing environments.
1Rich built-in weighing applications: basic weighing, statistical functions, formula weighing, piece counting, percent weighing, density determination, differential weighing, titration applications, pipette testing.
1Fully detachable, washable windscreen design for quick cleaning.
1Display plastic protective cover to avoid corrosion of scattered samples.
1Standard RS232 communication interface and an optional slot for Bluetooth, Ethernet, LocalCAN, RS232 and PS/ and PS/2 communication interfaces, which are convenient to connect peripheral devices such as printers and computers.
20. Weighing result output conforming to GxP specification, obtaining complete and traceable weighing information.
2Download the e-Loader II software through the Internet to realize the real-time update of the balance software.

METTLER ML104T Analytical Balances, Maximum Weighing Range 120 g, SHANGHAI SHENGUANG INSTRUMENT CO.,LTD (CAT#-STEM-STEM-GLE-4688-LGZ)
METTLER ML1502E Precision Balance, Range 1520 g, SHANGHAI SHENGUANG INSTRUMENT CO.,LTD (CAT#-STEM-STEM-GLE-5088-LGZ)
METTLER ML1602T Precision Balance, Range 1620 g, SHANGHAI SHENGUANG INSTRUMENT CO.,LTD (CAT#-STEM-STEM-GLE-5089-LGZ)
METTLER ML2001 Precision Balance, Range 2200 g, SHANGHAI SHENGUANG INSTRUMENT CO.,LTD (CAT#-STEM-STEM-GLE-5094-LGZ)
METTLER ML203E Precision Balance, Range 220 g, SHANGHAI SHENGUANG INSTRUMENT CO.,LTD (CAT#-STEM-STEM-GLE-5518-LGZ)
METTLER ML203T Precision Balance, Range 220 g, SHANGHAI SHENGUANG INSTRUMENT CO.,LTD (CAT#-STEM-STEM-GLE-5083-LGZ)