New Brunswick BioFlo 110 Fermentor, 1.3 L, 3 L, 7.5 L, 14.0 L, New Brunswick (CAT#: STEM-CCPO-0012-YJL)

New Brunswick BioFlo 110 Fermentor, 1.3 L, 3 L, 7.5 L, 14.0 L, model BioFlo 110, is manufactured by New Brunswick. New Brunswick’s BioFlo 110 Modular Fermentor & Bioreactor is versatile enough to meet specific laboratory needs. This powerful model was designed to simplify procedures for hassle-free processing. As a result, demanding laboratories are able to increase biomass yields to keep up with dynamic research requirements.
The BioFlo 110 fermentor automates procedures to ensure the accuracy and reliability of results. Operators can set points for both pH and dissolved oxygen (DO), which can be automatically maintained with this modular fermentor. Users can control pH through gas, acid or base addition with the cascade feature. Gas or addition agitations can be also used for DO manipulation. Users can also increase control flexibility by adjusting P-I-D values for both pH and DO.
Equipment operators have an option to use a manual rotameter or a digital mass flow control for gas flow management. New Brunswick adapters also provide a wide range of options by adjusting probe immersion lengths. Magnetic drive and direct drive options are also available for cell culture applications. Fermentation processes make use of the direct drive as a standard.
New Brunswick also enhanced control and the data logging efficiency of the BioFlo 110 modular fermetor & bioreactor with the NBS BioCommand® software and its Modbus compatibility.

Condition: Certified Pre-Owned
Vessel
Total Volume: 1.3 Liters, 3 Liters, 7.5 Liters, 14.0 Liters
Working Volume: 0.4 – 1.0 Liters, 0.8 – 2.2 Liters, 2.0 – 5.6 Liters, 4.0 – 10.5 Liters,
Design: Water-jacketed and heat-blanketed vessels available. All are autoclavable, dished-bottom, borosilicate glass.
Agitation
Fermentation: Direct drive, 50 – 1,200 rpm, dual Rushton-style impellers
Cell Culture: 30 – 300 rpm, direct or magnetic drive, pitched blade impeller
Temperature
Control: All vessels use P-I-D control for heating and cooling; Heat-Blanketed Vessels: External heat mantle & high-capacity immersed cooling coil; Water-Jacketed Vessels: Temperature-controlled water in glass jacket
Maximum Temp.: 70° C
Controller Design: Primary Control Unit (PCU) plus optional, stackable loop-control modules. PCU supports 4 vessels — up to 32 loops, total
Communications: Serial Port with BioCommand & Modbus protocols. 4-channel 0 – 2.5 V DC output for recorder
Primary Control Unit (PCU)
Functions: Human Interface Control Center for up to 4 vessels
Display: Bright text & graphics on 3.4 x 4.5” (8.6 x 11.4 cm) 1⁄4 VGA screen
Multi-Vessel Support: Automatically senses attached loop controllers
Upgrades: Built-in floppy drive for easy firmware upgrades
Display Languages: English, German, French & Spanish
Control Modes: Manual and Automatic
Operating Modes: Fermentation and Cell Culture
Power Controller: Provides power for temperature control (heating and cooling), agitation and 5 optional pumps for liquid addition and removal
4-Pump Module: Module provides four peristaltic pumps for liquid addition and removal
Antifoam/ Levels Controller: Module supports three conduction probes for automating liquid additions and removals, and foam control
DO₂- pH Controller
General Info: Optional controller with one pH and one dissolved oxygen (DO) probe connection
Dissolved Oxygen Control: Setpoint range: 0 – 100 %. Agitation or oxygen enrichment cascades. Sparge on demand. Four-gas algorithm for cell culture application
pH Control: Setpoint range: 2 – 12. Control – P-I-D with adjustable deadband. Acid/baseliquid additions (requires pumps). Four-gas mixing (requires Gas Mix Controller)
Gas Mix Controller: Four solenoid valves sequence additions of up to four gasses for pH and DO control in cell culture, or oxygen enrichment of sparge gasses
Utility Requirements
Water (50µ filter): 5–10 PSIG (0.34– 0.68 kg/cm²)
Air/O₂/CO₂/N₂: 3–10 PSIG (0.20– 0.68 kg/cm²) medical grade
Electricity: (2) 100/120V, 50/60 Hz, 10 Amp or (2) 200/240V, 50/60 Hz, 6 Amp
Certifications: CE, cETL
Simplified Ordering: A variety of complete kits are offered
Autoclave Glass Vessels sizes (total volume): 1.3, 3.0, 7.5 and 14.0 (L)
Vessel choices (available in 1.3, 3.0, 7.5 and 14L options) : single-wall vessel with heat blanket double-walled vessel with water-jacket heater
Available Kits: Basic fermentation; Advanced fermentation; Advanced cell culture
Controllers and components: Optional
Gas Mix Controller: Optional (Automatically mixes 2 to 4 gasses for optimized growth in microbial, insect and animal cell cultures)

Interchangeable control modules, impellers, motor drives and vessels
Pre-programmed control ranges
Control and view up to four separate vessels from a single screen
Built-in “cascade” feature
Adjustable P-I-D values for pH and DO

Eppendorf BioFlo 320 Bioprocess / Bioreactor System, 2.5 - 14 L (Autoclavable), 1.3 - 50 L (Single-use), Eppendorf (CAT#: STEM-CCPO-0006-YJL)
Major Science F1 Lab Scale Fermenter, 3L, Major Science (CAT#: STEM-CCPO-0007-YJL)
Major Science F1 Lab Scale Fermenter, 5L, Major Science (CAT#: STEM-CCPO-0008-YJL)
Major Science F1 Lab Scale Fermenter, 7L, Major Science (CAT#: STEM-CCPO-0009-YJL)
Major Science F1 Lab Scale Fermenter, 10L, Major Science (CAT#: STEM-CCPO-0010-YJL)