The manufacturer of the OneAC Power Conditioner is OneAC Corporation. The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.
Specification
Condition: Certified Pre-Owned Electrical: 100-240V, 50/60Hz, 13.2 Amps Normal and Common Mode Clamping Response Time: instantaneous Surge voltage withstand capability: ANSI/IEEE C62.41 Category A&B, 6 kV/200 & 500 Amp, 100 kHz ringwave Load Power Factor: 0: 3 leading to 0.3 lagging Load Regulation Response Time: <2 msec for a 50% change in load Interruption Response Time: output voltage will track input voltage in less than 2 msec at power-off and power-on for a single-cycle asynchronous notch Distortion: <1% THD added into a resistive load Overload Protection: twin pole circuit protection Cooling: convection Leakage Current (µA): <100 Operating Temperature: 0º to +40ºC (32 to 104ºF) Storage Temperature: -15 to 45ºC (+5 to 113ºF) Relative Humidity: 0 to 95%, non-condensing Operating Elevation: 0 to 3,000 m (0 to 10,000 ft) Storage Elevation: 0 to 15,000 m (0 to 50,000 ft) United States Safety Regulations: UL1012/UL60601-1 (Medical Electrical Equipment, Part 1 General Requirements for Safety) Canada Safety Regulations: CSA C22.2 No. 107.1 and 601.1 Europe Safety Regulations: CE marked as per IEC60601-1
Features
In excellent condition Thoroughly cleaned Fully tested to perform at manufacturer specifications
Related Products
Motor, Unknown US Motors Condensate Fan Motor, U.S. Motors Stainless Steel Baskets - Quantity 2, Unknown Walter Torque Wrench, Unknown