PFA Large-Capacity Sample Dissolution Tank, Temperature Tolerance (-200~+260℃), 90ml, U/V/Flat Bottom, (CAT#: STEM-BTVV-0071-TP)

PFA sample dissolution tank is also called sample dissolution cup, digestion bottle, and tube bottle. Its main uses are the digestion of geological and mineral experimental samples and the dissolution of medium and low pressure samples. This product can be used for trace analysis experiments such as ICP-MS/ICP-OES analysis. According to the requirements of the experiment, there are U-bottom, flat-bottom and V-bottom designs.

Specification (ml): 90
Material: PFA
Withstand temperature: -200~+260℃
Inner bottom: U, V, flat bottom

1. The appearance is translucent, the inner wall is smooth, does not hang water, and is easy to clean;
2. High and bottom temperature resistance: the operating temperature is -200 ~ +260 °C (not more than 150 °C under airtight conditions);
3. Threaded mouth, excellent sealing, no air leakage;
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
5. Anti-pollution: the blank value of metal elements is low;
6. No dissolution and precipitation, it is a good vessel for storing standard substances, highly corrosive and expensive ultra-reagents;
7. When dropped from a height of 1.2 meters above the ground, the bottle body does not break, the bottle cap does not fall off, and it does not leak, and the open mouth can be autoclaved;
8. The cover and body can be numbered digitally without confusion;
10. The design of the V-shaped bottom is more convenient for the collection of a small amount of samples; the design of the U-shaped bottom is suitable for the detection of physical and chemical exploration samples; the flat-bottom design of the sample is tiled, and the contact area with the electric heating plate is large, and the digestion efficiency is higher.