PowderSafe™ Type B Enclosure, 48"×30"×33", AirClean Systems (CAT#: STEM-LE-1205-Y)

The PowderSafe™ Type B Enclosure is manufactured by AirClean Systems. The device is equipped with an AirSafe™ automatic safety controller to achieve precise airflow control. The HEPASafe™ filter replacement technology guarantees the safe replacement of primary HEPA filters and pre-filters .

External (W × D × H): 48"×30"×33"

    AirSafe™ Automatic Safety Controller
    It can be used directly by plugging into a standard 110V or 220V power socket
    Integrated moisture-proof fluorescent lamp
    Brushless, non-sparking blower is the rear filter
    The low air volume alarm alerts the user visually and audibly
    No piping system required
    Horizontal laminar flow mode
    Filters and electronic components are located above the work area
    Tested to meet UL 61010-1 and CSA C222 No61010-1 standards
    Effectively weigh to 7 decimal places
    Permanent backup HEPA filter
    Continuously monitor the speed of the hood surface through variable airflow control to reach the user preset value
    Laboratory event timer
    HEPASafe™ technology allows HEPA filters to be safely replaced while the enclosure is running
    Exhaust gas is filtered by HEPA to prevent any potential particulate matter from returning to the room