Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

PP spray tower, Organic gas treatment towers, PERI (CAT#: STEM-LF-0014-LJX)

Highlights

1. The process is simple, Management, Operation and maintenance are very convenient and simple, And will not have any impact on the production of the workshop
2. Low pressure drop, High operating flexibility, And good defogging performance

Cat Number: STEM-LF-0014-LJX

Application: For laboratory use.

Model: STEM-LF-0014-LJX

Add to Cart



Description

The main mode of operation of organic gas treatment (spray tower) is that the organic gas is continuously introduced into the purification tower through the air duct, And after passing through the packing layer, The exhaust gas and the plant reagent biological reagent absorption liquid are fully contacted and absorbed in two phases, And the organic gas is neutralized. After purification, It is dewatered and defogged by the demister plate and then discharged into the atmosphere by the fan. The absorption liquid is pressurized by the water pump at the bottom of the tower and sprayed down from the top of the tower, And finally returns to the bottom of the tower for recycling. The purified organic gas Meet the emission requirements of local emission standards, Lower than the national emission standards.
The spray tower is widely used in the purification treatment of acid and alkaline waste gas discharged in the process of chemical industry, Electronics, Metallurgy, Electroplating, Textile (chemical fiber), Food, Machinery manufacturing and other industries. Such as seasoning food, Acid making, Pickling, Electroplating, Electrolysis, Storage battery, Etc.

Specification

Organic gas treatment towers are divided into single tower bodies and double tower bodies. It adopts a circular tower body and is connected by flanges in sections. Specifically, It consists of a liquid storage tank, A tower body, An air inlet section, A spray layer, A packing layer, A cyclone defogging layer, An air outlet cone cap, An inspection hole, Etc.

Features

1. The process is simple, Management, Operation and maintenance are very convenient and simple, And will not have any impact on the production of the workshop
2. Low pressure drop, High operating flexibility, And good defogging performance

Related Products

Laboratory dedicated fan, Centrifugal fan, FENGJ (CAT#-STEM-LF-0074-LJX)
PP material ventilation duct, PP, PERI (CAT#-STEM-LF-0015-LJX)
Laboratory Shelves, Cold-rolled sheet, FENGJ (CAT#-STEM-LF-0067-LJX)
All steel shelves, Cold-rolled sheet, FENGJ (CAT#-STEM-LF-0068-LJX)
Laboratory dedicated PP spray tower, PP, FENGJ (CAT#-STEM-LF-0071-LJX)
Laboratory organic waste gas treatment device (PP activated carbon adsorption box), PP, FENGJ (CAT#-STEM-LF-0072-LJX)

Other recommended products

Advertisement