ProDSS Conductivity and Temperature Sensor, YSI (CAT#: STEM-AIAE-0214-ZJF)

The ProDSS Conductivity and Temperature Sensor manufactured by YSI is a titanium user-replaceable digital smart conductivity and temperature sensor for the ProDSS Multiparameter Meter and ProSwap Digital Water Quality Meter.
When connected, it is automatically recognized by the instrument and calibration data is stored.
User-replaceable cables and sensors provide versatility and reduce downtime and the overall cost of ownership.
It features universal ports that can accept any four sensors as well as a depth sensor.
It is an accessory for the following products:
ProDSS Multiparameter Meter
ProSwap Digital Water Quality Meter

SKU: 626902
Accuracy:
Temperature - ±0.2 °C
Conductivity - 0.001, 0.01 or 0.1 µS/cm (range dependent)
Specific Conductance - 0.001, 0.01, 0.1 mS/cm
Salinity - 0.01 ppt
Resistivity - 0.001, 0.01, 0.1 ohms
Equipment used with: ProDSS, ProSwap
Measurement Range:
Temperature - -5 to 70 °C (temperature compensation range for DO mg/L measurement: -5 to 50 °C )
Conductivity - 0 to 200 mS/cm
Specific Conductance - 0 to 200 mS/cm
Salinity - 0 to 70 ppt
Resistivity - 0 to 2 Mohms
Seawater Density (Depth Required) - 0.0 to 50.0 sigma, sigma T
Resolution:
Temperature - 0.1 °C or 0.1 °F (user selectable)
Conductivity - 0.001, 0.01 or 0.1 µS/cm (range dependent)
Specific Conductance - 0.001, 0.01, 0.1 mS/cm
Salinity - 0.01 ppt
Resistivity - 0.001, 0.01, 0.1 ohms
Seawater Density (Depth Required) - 0.1 sigma or sigma T

Automatic recognition and data storage
User-replaceable cables for versatility and reduced downtime and costs
Universal ports for any four sensors and a depth sensor

ProDSS Multiparameter Meter, No GPS, YSI
ProDSS Multiparameter Meter, With GPS, YSI
ProSwap Digital Water Quality Meter, No GPS, YSI
ProSwap Digital Water Quality Meter, With GPS, YSI