The manufacturer of the QA-ES II Electrosurgery Analyzeris Fluke. QA-ES Series II analyzes electrosurgical units quickly and accurately. A wide load-resistance range provides 128 user-selectable loads, including very low loads for testing many of today's ESUs.An accuracy of ±5 % of reading down to 20 mA guarantees reliable high-frequency leakage results. With capability to run an automatic power- distribution test in as little as 1 minute, the QA-ES II works fast so technicians save time.An Ansur QA-ES software plug-in allows users to create and automatically run tests, capture data, and produce easy-to-read reports with a PC. The product is located in Irvine, CA, USA.
Specification
Condition: Certified Pre-owned Temperature: Operating: 15 ºC to 35 ºC (59 ºF to 95 ºF) Storage: 0 ºC to 50 ºC (32 ºF to 122 ºF) Display: LCD graphic display Alphanumeric Format: 8 lines x 40 characters Graphic Mode: 240 x 64 pixel matrix Display Control: 5 F-keys, enter, cancel, control knob, and an encoder Data Input/Outputs: Parallel printer port and bidirectional RS232 Power: 115/230 VAC; 48 to 66 Hz, 35 VA Housing: Metal case Dimensions (WxDxH): 34.2 cm x 39.5 cm x 13.2 cm (13.5 in x 15.6 in x 5.2 in ) Weight: 9.8 kg (21.6 lb)
Features
Continuous Operation: Continuous measurement of power, current, peak-to-peak voltage (closed load only), and crest factor Single Operation: Single measurement after the set delay time of the ESU output of power, current, peak-to-peak voltage (closed load only), and crest factor Power Distribution: Automatic measurement of power, current, peak-to-peak voltage (closed load only), and crest factor through a user-selectable load range RF Leakage current: Provides connections and load configurations to measure HF leakage from both grounded and isolated equipment RECQM: Test the return electrode control quality monitoring using the QA-ES internal loads Manual remote: Via Ansur test-automation software