Runmo RM-LM10 PVDF MBR Hollow Fiber Membranes, -0.01～-0.05MPa, Runmo (CAT#: STEM-GMAE-4792-LGZ)

PVDF MBR Hollow Fiber Membranes is the core-component of the membrane- bioreactor(MBR) for waste water/water re-use treatment system.

operation pressure MPa: -0.01～-0.05
tensile strength MPa: >120
back-wash pressure MPa: <0.2
working water temperature: 10-40℃
active membrane area m^2: 10-12
designed permeate flow L/m^2/H: 15-30
filtering accuracy μm: 0.03～0.05
membrane filaments inner bore diameter/outter bore diameter mm: 1.1/2.2
oil content mg/L: <3
transmembrane pressure difference MPa: 0.02～0.05
initial permeate flow m^3/H: 0.9
sludge concentration mg/L: 4,000-12,000
turbidity of water production NTU: <0.3
connecting pipe spec inch: 1/2
aeration amount Nm^3/pc: 3-6
back flushing pressure MPa: 0.05-0.1
water collecting mode: 2 ends collecting
filtering mode: submerged suction filtration

Runmo RM-NF70-4040 Nano Filtration Membranes Element, Desalinization Rate 65-75%, Runmo (CAT#-STEM-GMAE-4798-LGZ)
Runmo RM-LM15 PVDF MBR Hollow Fiber Membranes, -0.01～-0.05MPa, Runmo (CAT#-STEM-GMAE-4793-LGZ)
Runmo RM-LM20 PVDF MBR Hollow Fiber Membranes, -0.01～-0.05MPa, Runmo (CAT#-STEM-GMAE-4794-LGZ)
Runmo RM-UF-2860-W Ultrafiltration UF membranes, 55m2, Runmo (CAT#-STEM-GMAE-4795-LGZ)
Runmo RM-UF-2880-W Ultrafiltration UF membranes, 77m2, Runmo (CAT#-STEM-GMAE-4796-LGZ)
Runmo RM-XNF-4040 Nano Filtration Membranes Element, Desalinization Rate 35-45%, Runmo (CAT#-STEM-GMAE-4797-LGZ)