Obtained C3 OIML R60 certification, equipped with eccentric load compensation high-precision load cell.
Configure the limit device to protect the sensor from damage under 150% load.
High contrast LCD display.
The backlight can be switched on and off.
Equipped with a spirit level, the level can be adjusted.
Equipped with large-capacity rechargeable lithium battery, which can work continuously for 8 hours (theoretical value varies according to different working conditions).
Configure the RS232 interface, which can be connected to a micro-printer or computer, and the interface can also be closed through code settings.
POST.
Automatic calibration (external calibration).
Full scale tare.
1There are two peeling methods.
1With zero function.
1Configure piece counting function.
1Piece count samples can be adjusted.
1Configure the percentage function.
1Configure seven common unit conversions (including: g, kg, ct, lb, oz, ozt, tola).
1Sensitivity is adjustable.
1Zero tracking is adjustable.
1Three printing methods (manual, continuous, after the value is stable).
20. Adjustable baud rate (4800, 9600, 19200, 34800).
2The output interface has two-way communication, which can be fed back according to the instruction.
2Configure the code setting function, and set the balance accordingly to adapt to different use environments.
2Insufficient battery prompt, shutdown prompt, software version prompt, model prompt.
2Fault automatic alarm. Including: overload alarm, underload alarm, piece count or percentage sample error alarm, sensor damage alarm, sensor output error alarm.