Shinetek DIGICEN 21 Program Controlled Centrifuge, 410 x 530 x 320mm, Shinetek Instruments Research Institute (CAT#: STEM-LC-3094-LGZ)

Maximum load capacity: 4 x100ml; Maximum centrifugal force/speed: 26480xg / 16500RPM
The Digicen 21 centrifuge is versatile and can be used for centrifugation operations such as capillary tubes, microcentrifuge tubes, cryotubes, and microplates. Horizontal rotor, the maximum centrifugation volume for centrifuge tubes is 4×100ml. Angle rotor, for centrifuge tubes with a maximum centrifugation volume of 85ml.

Dimensions w x d x h mm: 410 x 530 x 320
Net weight Kg:36
Voltage V:220-230
Current Hz: 50-60
Power W:440

LCD display
* Display RPM/RCF, time
* Speed control, step 50RPM/50xg
* Can count down or count up after reaching the set value
* The timing is from 1 to 99min, and the program step is 5 seconds. It can be adjusted step by step or pause time setting
* PCBS function: progressively controlled acceleration and braking system up to 175 selectable slopes, preventing homogenization of samples after separation.
* 16 groups of program memory
* There are sound and screen information prompts to display the operation of the equipment in real time

Safety
* Safety system for the centrifuge cover
- Automatic mechanical lock cover
- Emergency cover unlock function
- Lock cover protection during operation
- Protection against sudden drop of cover
- Sight holes in the cover for operation inspection
* If there is no balance check, it will automatically stop
* There is an Anquan protective layer between the centrifugal chamber and the shell
* The centrifuge chamber is made of stainless steel (easy to clean)
* The rotor is removable when the cover is closed
* Both rotor and adapter are autoclavable for easy installation
* Forced internal air flow can reduce temperature increase
* Energy saving setting with auto disconnect option setting

Easy to use
* Microcomputer program control
* Brushless maintenance-free motor
* Rotor memory function
* Noise level, below 60dB
* With start, stop, cover opening and instantaneous centrifugation functions
* Speed can be adjusted by RPM/RCF during operation.
* Automatically memorize the parameter setting value after Z
* Overspeed protection

Refrigeration
* After centrifugation, keep cooling
* Pre-cooling and with rotor selection function
* In the case of maximum speed, it can maintain a constant temperature of 4°C
* Temperature range -20°C — 40°C, temperature step adjustment 1°C
* The temperature sensor is in the centrifuge chamber, feedback the temperature in the chamber
* R449A environmentally friendly refrigerant (CFC-free)

EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Implementing regulations: (EC) 1005/2009, (EU) 517/2014.
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Shinetek Digtor 22 C-U Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3100-LGZ)
Shinetek DIGICEN 21R Program Control Centrifuge, Shinetek Instruments Research Institute (CAT#-STEM-LC-3095-LGZ)
Shinetek Digtor 21 col Benchtop Centrifuge (Life Science), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3096-LGZ)
Shinetek DIGTOR 22 Benchtop Centrifuge, 540 x 650 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3097-LGZ)
Shinetek Digtor 22 C Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3098-LGZ)
Shinetek Digtor 22 C-8 Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3099-LGZ)