Shinetek DIGTOR 22R Refrigerated Benchtop Centrifuge, 720 x 805 x 390mm, Shinetek Instruments Research Institute (CAT#: STEM-LC-3101-LGZ)

Maximum load capacity: 4 x750ml; Maximum centrifugal force/speed: 21948xg / 14300RPM
DIGTOR 22R desktop centrifuge is widely used in laboratories, research and development centers, biotechnology, quality control, medical and other fields. Ergonomic design, easy to remove and install the rotor. The unbalanced point recognition function can directly locate the unbalanced point, which is convenient to use. The centrifuge volume ranges from 0.2ml to 750ml, which can be used in microwell plates, cell culture plates, and centrifuge tubes of various specifications. There are more than 50 kinds of adapters to choose from, with flexible application and strong functions. TFT color touch display information, can be used for programming control. Through programming control, the operation can be programmed for parameter setting, start-up setting, etc., and the operation process is traceable. The refrigeration system makes it possible to keep the minimum temperature of the cabinet below 4°C when using the rotor and operating speed.

Dimensions w x d x h mm: 720 x 805 x 390
Net weight Kg:95
Voltage V:220-230
Current Hz: 50-60
Power W:1050
Max Advisable(Hz): <|0.446|

TFT color display, observable distance over 3m
* Display RPM/RCF, time, acceleration/deceleration digital (PCBS), with untrimmed positioning function (ULS)
* Speed control, step 10RPM/10xg
* RCF real-time display function based on actual use of the accessory.
* Countdown or countdown function, reaching the set RPM/RCF timing function to ensure the reproducibility of the experiment
* Timing is set from 1min-99h program, step 1s, with step-by-step and stop program function
* PCBS function: progressively controlled acceleration and braking system up to 175 selectable slopes, preventing homogenization of samples after separation.
* ULS function: if there is an untrim situation, it will directly display the untrim position number of the rotor.
* 40 sets of program memory with password protection function
* There are different prompt sounds and screen information prompts to display the operation of the device in real time

Refrigeration
* After centrifugation, keep cooling
* Pre-cooling and with rotor selection function
* In the case of maximum speed, it can maintain a constant temperature of 4°C
* Temperature range -20°C — 40°C, temperature step adjustment 1°C
* The temperature sensor is in the centrifuge chamber, feedback the temperature in the chamber
* R449A environmentally friendly refrigerant (CFC-free)

EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.
EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Implementing regulations: (EC) 1005/2009, (EU) 517/2014.
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Shinetek Digtor 22 C Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3098-LGZ)
Shinetek Cytocentrifuge Benchtop Centrifuge (Life Science), 410 x 530 x 320mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3093-LGZ)
Shinetek DIGICEN 21 Program Controlled Centrifuge, 410 x 530 x 320mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3094-LGZ)
Shinetek DIGICEN 21R Program Control Centrifuge, Shinetek Instruments Research Institute (CAT#-STEM-LC-3095-LGZ)
Shinetek Digtor 21 col Benchtop Centrifuge (Life Science), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3096-LGZ)
Shinetek DIGTOR 22 Benchtop Centrifuge, 540 x 650 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3097-LGZ)