Shinetek UNICEN21 Desktop Universal Centrifuge, 410 x 530 x 320mm, Shinetek Instruments Research Institute (CAT#: STEM-LC-3109-LGZ)

Maximum load capacity: 4 x100ml; Maximum centrifugal force/speed: 2938xg / 4200RPM Universal, compact, flexible and low noise, is the design concept of Unicen21. The maximum capacity is 4×100ml, up to 4.200RPM/ 2.899xg, with digital display of speed and time. The cover opens automatically after the operation is finished.
Fully automatic operation mode saves operating procedures.
Safety operating system: maintenance-free brushless motor; automatic detection of rotor balance; all stainless steel centrifugal chamber; automatic locking of the machine cover. Ideally run even with small samples, it is undoubtedly the most appropriate choice for urgent experiments as it reduces sample preparation time.

Dimensions w x d x h mm: 410 x 530 x 320
Net weight Kg:36
Voltage V:220-230
Current Hz: 50-60
Power W: 280

Rotor RT177, horizontal rotor
Capacity: 8 x 15ml
Maximum speed RPM: 4200
Radius mm: 145
Maximum centrifugal force xg: 2860
Centrifuge tube specification/centrifuge tube quantity:
15 ml Ø 16 x 100: 8
15 ml. Conical bottom: Ø 17 x 122: 8
10 ml Ø 13 x 100: 8
10 ml Ø 13 x 100: 8
7/10 ml blood collection tubes Ø 13 x 107: 8
5 ml. Ø 13 x 75: 8
5 ml blood collection tubes Ø 13 x 82: 8
1,5-2ml centrifuge tube Ø 11 x 42: 8
1,5-2ml centrifuge tube Ø 11 x 42: 8
0.2-0.4ml centrifuge tubes Ø 6 x 45: 8

Easy to use
* Microcomputer program control
* Brushless maintenance-free motor
* Rotor memory function
* Noise level, below 60dB
* With start, stop, cover opening and instantaneous centrifugation functions
* Speed can be adjusted by RPM/RCF during operation.
* Automatic opening function
* Automatically memorize the parameter setting value after Z
* Overspeed protection

LED display
* Display RPM/RCF, time
* Speed control, step 50RPM/10xg
* Can count down or count up after reaching the set value
* The timing is from 1 to 99 minutes, and the program step is 1 minute. It can be adjusted step by step or pause time setting
* Acceleration and deceleration control is divided into three steps: fast, medium, inertia
* There are sound and screen information prompts to display the operation of the equipment in real time

Safety
* Safety system for the centrifuge cover
- Automatic mechanical lock cover
- Emergency cover unlock function
- Lock cover protection during operation
- Protection against sudden drop of cover
- Sight holes in the cover for operation inspection
* If there is no balance check, it will automatically stop
* There is an Anquan protective layer between the centrifugal chamber and the shell
* The centrifuge chamber is made of stainless steel (easy to clean)
* The rotor is removable when the cover is closed
* Both rotor and adapter are autoclavable for easy installation
* Forced internal air flow can reduce temperature increase
* Energy saving setting with auto disconnect option setting

EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Shinetek Digtor 22 C-U Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3100-LGZ)
Shinetek DIGICEN 21R Program Control Centrifuge, Shinetek Instruments Research Institute (CAT#-STEM-LC-3095-LGZ)
Shinetek Digtor 21 col Benchtop Centrifuge (Life Science), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3096-LGZ)
Shinetek DIGTOR 22 Benchtop Centrifuge, 540 x 650 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3097-LGZ)
Shinetek Digtor 22 C Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3098-LGZ)
Shinetek Digtor 22 C-8 Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3099-LGZ)