Spirapak Plus Modules, Spirapak Plus 4033-M183-LPP, Membrane Area ft² (m²): 63 (5.9), Koch Membrane Systems (CAT#: STEM-P-0163-LSY)

Spirapak Plus Modules, Spiral Wound Element With Integrated PVC Housing, model Spirapak Plus 4033-M183-LPP is manufactured by Koch Membrane Systems. Spirapak Plus Modules are the original products of our advanced Kpak^® Plus modules, which are used for the recovery of electrocoat paints and the treatment of oily wastewater. The membrane type and material of the product are HFM-183 (positive charge) and PVDF respectively. This product is a high productivity potted ultrafiltration spiral module suitable for electrocoat paint.

Part Number: 0700787
Feed Spacer mil (mm): 30 (0.8)
Membrane Area ft² (m²): 63 (5.9)
Membrane Chemistry: PVDF
Membrane Type: HFM-183 (positive charge)
Construction: Spiral wound element with integrated PVC housing
Seal: EPDM

High productivity
Low energy
Chlorine tolerant HpHT
Blister free
Large variety of membrane pore sizes

Spirapak Module, Spirapak 4033-HFM-183-LPP, Membrane Area: 59 ft² (5.5 m²), Koch Membrane Systems (CAT: STEM-P-0162-LSY)
Spirapak Plus Modules, Spirapak Plus 4033-M183-VPP, Membrane Area ft² (m²): 54 (5.0), Koch Membrane Systems (CAT: STEM-P-0164-LSY)
Spirapak Plus Modules, Spirapak Plus 4038-M183-LPP3, Membrane Area ft² (m²): 81 (7.5), Koch Membrane Systems (CAT: STEM-P-0165-LSY)
Spirapak Plus Modules, Spirapak Plus 4038-M183-VPP3, Membrane Area ft² (m²): 65 (6.0), Koch Membrane Systems (CAT: STEM-P-0166-LSY)